tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Chorus › Blackstar

Blackstar HT-Modulation

Blackstar HT-Modulation

Chorus
Key facts
MakerBlackstar1
TypeModulation multi-effects pedal1
Effects8 modulation effects1
BypassHigh integrity buffered bypass1
ModesManual and Slow/Fast modes1

The Blackstar HT-Modulation is a multi-effects pedal that packs eight classic modulation effects into one box, covering chorus, phaser, flanger, tremolo and rotary sounds. Blackstar describes its range as running "from gentle tremolo to roaring jet engine flange," with "all the musicality of classic vintage effects pedals"1.

What sets it apart from most digital multi-effects is its valve stage: the Saturation control adjusts the drive to a high voltage valve circuit in the effect side chain, adding valve compression and harmonics to the effect itself1.

The eight effects

The effect selector offers eight positions1:

PositionEffect
1Flanger
2Tremolo
3Rotary
4Phaser 1
5Phaser 2
6Vintage Chorus 1
7Multi Chorus
8Chorus 2

Two phaser and three chorus positions give distinct variations within those families, so a player can choose between, for example, a vintage single-voice chorus and a multi-voice chorus without stacking another pedal1.

Controls and panel

The panel carries MODE, SPEED, FEEDBACK, LEVEL, SLOW/FAST and SATURATION knobs, plus an ON footswitch1.

ControlWhat it does
MODESelects one of the eight effects
SPEEDSets the speed in Manual Mode
FEEDBACKSets effect intensity (regeneration)
LEVELSets the effect level
SLOW/FASTSets the preset slow and fast speeds
SATURATIONAdjusts drive to the high voltage valve circuit, affecting valve compression and harmonics in the effect
ONFootswitch, turns the effect on and off

Manual and Slow/Fast modes

The pedal runs in two modes1:

  • Manual Mode: the Speed control sets the speed directly, like a conventional pedal.
  • Slow/Fast Mode: the footswitch toggles between two preset speeds for live flexibility, in the style of a rotary speaker's slow and fast settings. The LED flashes in time with the speed, so a player can see where the effect is sitting on a dark stage.

The Slow/Fast setup is aimed at live use: rather than bending down to sweep the Speed knob mid-song, a tap of the footswitch jumps between the two preset rates1.

Bypass and the valve stage

The HT-Modulation uses a high integrity buffered bypass rather than true bypass1. A buffer keeps the signal actively driven when the pedal is off, which suits long cable runs and large pedalboards, though players who prefer a fully passive signal path when bypassed may want to factor that in.

The valve side chain is the pedal's signature feature. As the manual puts it1:

"By adjusting the drive to the high voltage valve circuit in the effect side chain, Saturation affects the amount of valve compression and harmonics in the effect."1

In practice, Saturation lets a player dial in how much valve character colors the modulation, from a cleaner vintage-style effect to one with more compression and harmonic content1.

Videos

Musikmesse '10 - Blackstar Amps HT Pedals Demos: Modulation, Delay & Reverb
Premier Guitar
Crazytrainmusic: Blackstar HT-Modulation demo
crazytrainmusic
Blackstar HT MODULATION
BUZZBEE TV

Questions

Does the Blackstar HT-Modulation have a real tube in it?

Yes. The pedal runs a high voltage valve circuit in the effect side chain, and the Saturation control adjusts the drive to that valve stage, which changes the amount of valve compression and harmonics in the effect. Blackstar describes the result as the musicality of classic vintage effects pedals.

Is the Blackstar HT-Modulation true bypass?

No. Blackstar specifies a high integrity buffered bypass rather than true bypass. A buffered bypass keeps the signal path active when the pedal is off, which preserves signal strength over long cable runs instead of switching the effect out entirely.

What effects are on the Blackstar HT-Modulation?

Eight modulation effects: Flanger, Tremolo, Rotary, Phaser 1, Phaser 2, Vintage Chorus 1, Multi Chorus and Chorus 2. Blackstar describes the range as running from gentle tremolo to roaring jet engine flange, covering chorus, phaser, rotary and flanger sounds in one unit.

Sources (1)
  1. Blackstar HT-MODULATION Quick start User Manual download pdf, Blackstar