tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Compressor › Carl Martin

Carl Martin Compressor Limiter

Carl Martin Compressor Limiter

CompressorDiscontinued
Key facts
TypeCompressor/limiter pedal, analog dynamics processor1
MakerCarl Martin, hand-made in Denmark1
ControlsThreshold, Compression, Response, Gain1
PowerExternal 9V DC supply, internally regulated to ±12V, 130mA minimum (units after January 2016)1
BatteryNo1
Signal-to-noise ratio105dB1
THD0.05%1

The Carl Martin Compressor/Limiter is a professional-grade dynamics processor pedal, hand-made in Denmark, that Carl Martin designed to deliver the same sonic clarity, quietness and performance as high-end studio compressor/limiters1. It is an analog compressor pedal aimed at players who want studio-style control over dynamics on a pedalboard, from subtle tone fattening to extreme singing sustain, punchy funk and country "chicken-pickin" sounds, and transparent peak-limiting1.

The maker describes it as a breakthrough in guitar dynamics processing, bringing true studio-quality compression to the pedalboard, with a 105dB signal-to-noise ratio and 0.05% THD distortion1. Its size, though, became part of its reputation: the original is a big black hand-made-in-Denmark pedal, and by 2022 Delicious Audio called it "almost vintage," reporting that "the word got out that it was just too big for modern pedal boards"23.

The controls

The pedal has four interactive controls, plus the Busy Light indicator. Carl Martin says they cover everything from subtle studio fattening to extreme violin-like sustain for lead work1.

ControlWhat it does
ThresholdSets the compression start point, with a 60dB range1
CompressionAdjusts the ratio from 1:1 to ∞:11
ResponseSets attack/release characteristics, 12.5ms to 125ms, from fast peak-limiting to active signal-dependent compression1
GainMake-up gain with a ±20dB range, to compensate for compression level reduction or add boost for solos1

The Response control is where the pedal earns its "limiter" name: at fast settings it behaves as a peak limiter, catching transient spikes, while slower settings give signal-dependent compression that reacts to how you play1.

The Busy Light

A "Busy Light" LED indicator shows real-time compression activity, even in bypass mode. It brightens proportionally to the amount of gain reduction being applied, so you can see at a glance how hard the compressor is working1. For a player dialing in Threshold and Compression by ear, it is a quick way to confirm the pedal is actually engaging on quiet passages or only on hard-hit notes.

Power: 9V DC, regulated to ±12V

Units built after January 2016 use Carl Martin DC/DC circuitry that delivers internally regulated ±12V from an external 9V DC supply, with a 130mA minimum draw1. The higher internal rail voltage is the same approach Carl Martin uses across the family: the Dual Compressor Limiter also runs internally at 12V generated from a 9V input to increase headroom4, and the Andy Timmons Signature model uses an internal power converter to run ±12V for its circuitry5.

There is no battery option. The maker describes the post-2016 units as ensuring consistent professional performance "without battery hassles"1, so the pedal needs a 9V DC supply rated for at least 130mA1.

Who uses it

Carl Martin's artist pages list a roster of players using the Compressor Limiter, including Tim Pierce, Rex Brown, Michael Thompson, Steve Kahn, Alan Iarussi, Martin Estrada and Pat Tomaselli61. Andy Timmons uses his own signature version of the pedal6.

Versions and editions

The Compressor Limiter's size led Carl Martin to build a family of smaller pedals around the same circuit.

VersionFormControlsNotes
Compressor LimiterLarge-format, hand-made in Denmark2Threshold, Compression, Response, Gain1The original; post-January 2016 units regulate 9V to ±12V1
Comp/Limiter (2018)Compact, gray anodized27Comp and Level only7Threshold and Response fixed from the factory7; identical features and performance to the original in a streamlined design7
Andy Timmons Signature (2015)Compact, two footswitches5Six knobs; Threshold and Response as 6mm mini knobs shared by both presets5Two switchable presets for rhythm and solo5; discontinued5
Dual Compressor LimiterTwo independent channels in one pedal4Threshold, Comp and Level per channel, Dry, Select, Bypass4Up to 30:1 ratio, usable as a peak limiter4; remote jack4
Honey Comp (2022)Same footprint as the Comp/Limiter2Comp, Level, Dry3Adds a Dry knob for parallel compression3

The Comp/Limiter, introduced as a 2018 version, was developed on request from working musicians who wanted a user-friendly compressor that takes limited real estate on the board7. Premier Guitar reported at its launch that it is based on the original pro-series Compressor/Limiter "yet without the more complex features like threshold and response," with top-mounted input and output jacks and a DC jack for an external PSU, and that it does not accept a 9V battery8. It runs on a regular 9V DC 200mA external power supply7.

The Andy Timmons Signature Compressor/Limiter, announced in August 2015, takes the analog Compressor/Limiter circuit and gives you two switchable compression settings in one unit, one for rhythm and one for solos5. It has two footswitches, one to engage or bypass the compressor and another to toggle between presets, plus remote preset switching via a 1/4" jack5. Carl Martin lists it as a discontinued legacy product5.

MusicRadar's reviewer Trevor Curwen found it versatile, with "very few" reasons to avoid it, calling it "a smart idea for your 'board in a user-friendly format"9. He noted that both presets share the same Threshold and Response settings via the 6mm miniature knobs, and that while separate knobs for each preset would have been ideal for flexibility, the setup keeps the pedal uncluttered and compact9. He also found the Level knobs provide up to 12dB of extra level for driving your amp, and that the pedal can be set for no compression and used purely as a booster with two levels of boost9.

"A smart idea for your 'board in a user-friendly format."
Trevor Curwen, MusicRadar9

The Honey Comp, announced in April 2022, is an update on the Compressor Limiter with simplified controls and an added Dry knob that allows for parallel compression3. Delicious Audio described the original as the Danish company's "popular (and now almost vintage) Compressor Limiter"3.

Videos

Carl Martin Compressor/Limiter demo by James Mulvaney
James Mulvaney
Carl Martin Compressor Limiter | Reverb Demo Video
Reverb
Carl Martin Compressor / Limiter - Comp Pedal Review
EytschPi42

Questions

Does the Carl Martin Compressor Limiter take a battery?

No. Units built after January 2016 use Carl Martin DC/DC circuitry that regulates an external 9V DC supply (130mA minimum) to ±12V internally, and the maker describes them as working without battery hassles. There is no battery option on the current pedal.

Will the Carl Martin Compressor Limiter fit on a pedalboard?

The original Compressor Limiter is a large-format, hand-made-in-Denmark pedal, and Delicious Audio reported in 2022 that word got out it was just too big for modern pedal boards. Carl Martin's answer was the compact Comp/Limiter, which keeps the same features and performance in a smaller footprint.

What does the Busy Light on the Carl Martin compressor show?

The Busy Light is an LED indicator that shows real-time compression activity, even when the pedal is in bypass mode. It brightens in proportion to the amount of gain reduction being applied, giving you instant visual feedback on how hard the compressor is working.

What is the Andy Timmons Signature Compressor/Limiter?

A two-preset version of the Compressor/Limiter circuit developed with Andy Timmons, announced in August 2015. It offers one switchable preset for rhythm and one for solo compression, with Threshold and Response fixed as 6mm miniature knobs shared by both presets. Carl Martin lists it as a discontinued legacy product.

How is the Honey Comp different from the Compressor Limiter?

The Honey Comp is a 2022 update on the Compressor Limiter with simplified controls: Threshold and Response are preset, leaving just Comp and Level knobs, plus an added Dry knob for parallel compression. It shares the Comp/Limiter's footprint and gray anodized finish.

Does the Andy Timmons Compressor/Limiter take a battery?

No. Carl Martin states it does not take a battery, because the current it draws plus the size of the unit mean external supply only. It requires a 9V DC regulated power supply with about 120 to 140 mA of current, through a standard 2.1mm center-negative jack.

Sources (9)
  1. Compressor Limiter, Carl Martin, 2026
  2. Honey Comp, Carl Martin, 2026
  3. Carl Martin Honey Comp, Delicious Audio, 2022-04-29
  4. Dual Compressor Limiter, Carl Martin, 2026
  5. Andy Timmons Signature Compressor/Limiter, Carl Martin, 2026
  6. Artists - Carl Martin, Carl Martin (carlmartin.com), 2026
  7. Comp Limiter, Carl Martin, 2026
  8. Carl Martin Unveils the Comp/Limiter, Premier Guitar, 2018-11-19
  9. Carl Martin Andy Timmons Compressor review, MusicRadar, 2017-07-15

Players who use the Compressor Limiter

All players

Other compressor pedals

All compressor pedals