The GUP Tech Vej2 Douche Edition is an amp-in-a-box preamp-overdrive: a pedal designed to bring the feel and response of a specific amplifier channel onto a pedalboard. GUP Tech describes it as a pedal that "brings a complete amp feeling to your pedalboard," with a full EQ and very low noise1. It is based on the green channel of an amp from a famous Canadian amp maker, and it is built in Saguenay, Québec, Canada, where the company makes all of its pedals1.
Drive modes
The green-channel circuit gives the Vej2 three drive modes, selected on a toggle1:
| Mode | What it does |
|---|---|
| 0 | Full range boost |
| 1 | Tight Distortion |
| 2 | Fat Distortion Channel |
GUP Tech suggests running it into a clean channel, or straight into the FX loop return of a tube amp, where it can act as a preamp in its own right: "It sounds great on clean channel or directly in the FX Loop return of a tube amp"1. The full EQ makes it flexible in either position, shaping the voiced low, mid and top of the amp circuit rather than acting as a one-knob drive1.
The Douche Edition design
The Douche Edition is GUP Tech's decorated take on the Vej2 circuit. The company announced it on May 7, 2022, "with sparkling broccoli and names," following a January 17, 2021 update that introduced the new Broccoli design artwork to the pedal1. The sparkling enclosure is the main thing that sets this version apart from the standard Vej2, which GUP Tech has also listed in Green and Black color options2.
The Vej2 Douche Edition is listed as sold out on GUP Tech's product page as of October 20261. The standard Vej2 Preamp Overdrive carries the same amp-in-a-box approach with three gain modes and a full EQ2.
Power and use on a board
The pedal runs at 9Vdc and draws 12mA, a light load for a pedalboard power supply1. GUP Tech notes that 12 to 18Vdc is safe to use, but that running above 9V "you won't get anything more," so there is no extra headroom to be gained from a higher supply1. As a preamp-overdrive it sits in the same family as other preamp pedals and overdrive pedals, and GUP Tech's range includes related drives such as the PHNX Overdrive and Horsie Overdrive.
Questions
Where is the GUP Tech Vej2 Douche Edition made?
GUP Tech builds all of its pedals in Saguenay, Québec, Canada, and the Vej2 Douche Edition is no exception. The maker states on the product page that every pedal is made by the company itself in Saguenay, which is where this preamp-overdrive is produced.
Can the Vej2 run on more than 9V?
Yes. The Vej2 Douche Edition is specified at 9Vdc, and GUP Tech says voltages from 12 to 18Vdc are safe. The maker also notes that running above 9V will not get you anything more, since the pedal does not produce additional headroom or output at higher supply voltages.
Is the Vej2 Douche Edition sold out?
Yes. As of the maker's product page dated October 2026, the Vej2 Douche Edition is listed as sold out. The standard Vej2 Preamp Overdrive, which shares the same amp-in-a-box circuit approach, has been listed separately by GUP Tech.
How much current does the Vej2 draw?
GUP Tech specifies power consumption of 12mA at 9Vdc. That is a light draw by pedal standards, so it is unlikely to strain a standard pedalboard power supply.
What amp is the Vej2 circuit based on?
GUP Tech describes the Vej2 as based on the green channel of an amp from a famous Canadian amp maker. The company does not name the amp directly on the product page, but the green channel reference and the pedal's Vej2 name point to the same source.
Sources (2)
- Vej2 - Douche Edition, GUP Tech, 2021-01-17
- Vej2 - Preamp Overdrive, GUP Tech (guptech.ca)
