tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Overdrive › Joyo

Joyo Hot Plexi

Joyo Hot Plexi

Overdrive
Key facts
TypeDistortion pedal simulating an amp1
MakerJoyo1
ModelJF-321
BypassTrue bypass1
Power6F22 9V battery or DC 9V adapter1
Current draw9mA1
Input impedance1MΩ1
Output impedance1KΩ1
Length118 mm1
Weight200g1

The Joyo Hot Plexi, model JF-32, is a compact distortion pedal from Joyo that simulates a classic amp rather than adding drive on top of one. Despite the name, Joyo describes it as simulating the classic JCM800 amp, "but with greater distortion and stronger output"1. In other words, it is aimed at the higher-gain Marshall-style sound, not the vintage Plexi its name suggests.

It is a small, light box: 118 mm long and weighing 200g, with a 1MΩ input impedance and 1KΩ output impedance1.

Power and bypass

The Hot Plexi runs on either a 6F22 9V battery or a DC 9V adapter, drawing 9mA1. That draw is low enough that a battery lasts a long time, and the pedal is easy to place on a powered board. Joyo states it uses a true bypass design, so your signal passes through untouched when the pedal is off1.

The name says Plexi, but Joyo's own description is a JCM800 simulation with greater distortion and stronger output. Players looking for a vintage low-gain Plexi sound should read the description, not the name1.

Where it sits among Joyo drive pedals

The Hot Plexi is one of several Joyo pedals built around amp-style sounds. Others in the range include the Joyo AC Tone, the Joyo California Sound, and overdrives such as the Joyo JF-01 Vintage Overdrive and the JOYO R-20 King of Kings. Where those lean toward cleaner or mid-gain territory, the Hot Plexi is the higher-gain, amp-simulation option in the lineup1.

Videos

JOYO Hot Plexi Effect Pedal Simulates Classic JCM800 Amp with Greater Distortion
JOYO Direct
Joyo HOT PLEXI overdrive guitar effects pedal demo with Stratocaster
gearmanndude
Joyo HOT PLEXI Distortion - Pedal Demo
EytschPi42

Questions

Is the Joyo Hot Plexi true bypass?

Yes. Joyo states the JF-32 Hot Plexi uses a true bypass design, so the pedal passes your signal unaltered when it is switched off.

Does the Joyo Hot Plexi take a 9V battery?

Yes. Joyo lists the power options as a 6F22 9V battery or a DC 9V adapter, so it can run either way. Current draw is 9mA.

Is the Joyo Hot Plexi a Plexi or a JCM800 sound?

Despite the name, Joyo describes the Hot Plexi as simulating the classic JCM800 amp, but with greater distortion and stronger output. It is a higher-gain take on that amp sound rather than a vintage Plexi clone.

Sources (1)
  1. JF-32 Hot Plexi_JOYO, JOYO, 2019-12-17

Other overdrive pedals

All overdrive pedals