Boss releases eBand JS-10 system program Ver.1.10
November 1, 2024 · 1 sources
The page lists the change under "Change the specification": "The default value for AUTO OFF has been changed to 20 minutes."1 It directs readers to the owner's manual for information on the Auto Off function1.
The previous entry in the update history is Ver.1.01, dated April 2013, which fixed two USB 3.0 problems: some computers might not recognize the device connected through a USB 3.0 port, and other USB equipment might not work when a computer rebooted with the device connected that way1.
The page gives the update procedure. Owners check the installed version by holding down the [ EXIT ] and [ ENTER ] buttons and pressing the POWER button; the display shows the current version at "VERSION:"1. If it shows version 1.10 or later, the page says there is no need to update1. The download, "js10_sys_v110.zip", extracts to three files named "_BOOTPRG.ES_", "_JS10PRG.JS_" and "_UPDINFO.JS_"1. These are copied to the root directory of an SD card formatted on the eBand JS-10, using an SD card reader or a computer with an SD card slot1. With the card inserted, the user holds down [ REC ] and [ STOP ] and switches on the power, then presses [ ENTER ] to start the update; "Complete!!" appears when it finishes1.
Boss warns that a power failure or similar accident during the update will leave the eBand JS-10 unable to start up in normal operating mode, requiring service1. It recommends backing up user data first and says the update data must never be applied to any product other than the eBand JS-101.
"We regret that we are unable to answer questions regarding the update procedure using this system program."