Boss releases GX-10 Ver.1.02 firmware with new preset patches

October 1, 2024 · 1 sources

Boss released GX-10 system program Ver.1.02 in October 2024, according to the update history on the maker's support page for the GX-10, a multi-effects unit listed among the site's multi-effects pedals.

The update is listed under Functionality Improvement and Bug Fixes. Boss says new preset patches have been added in P05-1 through P07-2, and points owners to the Parameter Guide for details. The three bugs fixed are:

• IR loaded on some USER area in SPEAKER TYPE does not sound.
• Depending on AMP TYPE, noise occurs when switching a memory.
• Depending on AMP TYPE, SOLO SW sometimes does not work as desired.

The page gives no price and no other availability information for the update. It lists the requirements for installing it: the GX-10, a USB cable and a computer running Windows or macOS with a USB 2.0 port. The update is carried out with the unit connected to the computer by USB.

Boss instructs owners to hold down the WRITE button while turning the power on until "GX-10 Updater" appears, then copy the update files to the root directory of the GX-10 drive. The page warns that powering off during the update can leave the unit unable to start in normal operating mode, which would require servicing. To check the installed version, Boss says to turn the unit on and read the version information in the lower right corner of the startup display.