The Boss NS-2 Noise Suppressor is a noise gate pedal from Boss that removes the unwanted noise and feedback you get from playing at high volumes or with a lot of gain1. It has been in continuous production since 1987, which makes it one of the longest-running pedals in the Boss compact line, and Boss calls it a best-selling staple of the stompbox series2. Gearnews calls it "the 1987 industry standard"3.
It is an all-analog circuit with what Boss describes as a more traditional approach to noise suppression, most effective for simple, relatively aggressive gating with intuitive features for natural decay2. Boss introduced the digital NS-1X in 2023 as its first new noise suppressor since the NS-2, but the NS-2 remains in the line.
The controls: Threshold, Decay and the Reduction/Mute switch
The NS-2's front panel is simple: Threshold and Decay knobs, a Reduction/Mute switch, and a send/return loop3.
| Control | What it does |
|---|---|
| Threshold | Sets how much or how little feedback and noise reaches your amp1 |
| Decay | Adjusts the release, how quickly the pedal removes feedback and unwanted noise after you stop playing1 |
| Mode switch (Reduction / Mute) | Reduction mode suppresses noise continuously; Mute mode silences the signal1 |
Premier Guitar notes that the threshold and decay controls allow for shaping the elimination and suppression as desired5. The two modes also change how the footswitch behaves: Guitar World describes one mode where the pedal is only active when the footswitch has been pressed, and a second, always-on mode where the footswitch mutes the input6.
The send and return jacks are the feature that sets the NS-2 apart from a plain inline gate. Pedal of the Day's reviewer notes they let you attach other effects or a tuner, and that Mute mode allows tuning quietly or muting a whole section of pedals1. Guitar World describes using the loop to isolate drives and an amp preamp, whether the pedal sits at the start of a chain to debug pickup hum or further back6.
Boss notes that the NS-2's maximum input level is +7dBu, which means unintentional clipping may occur at the return input stage depending on an amp's send specs2.
Where it came from
The NS-2 dates back to 19873, a year one writer singles out in calling it "the 1987 industry standard"3. Boss's earlier noise gate was the NF-1 Noise Gate, which the NS-2 replaced in the lineup. In the decades since, it has remained the company's familiar noise suppressor pedal, and reviewers still treat it as the reference point for the type.
What reviewers and players say
Reviewers consistently praise the build. Guitar World's writer notes it comes in the standard Boss chassis, "world-renowned for its durability," and says he owned and gigged the pedal for several years, attesting it will put up with rough and tumble6.
On the sound, Gearnews' verdict is more qualified:
"What you trade is top end. This contender on our list for best noise gate pedals is a solid all-rounder for classic rock, hard rock and anything where notes are allowed to ring."3
One reviewer calls the NS-2 "a solid all-rounder for classic rock, hard rock and anything where notes are allowed to ring," while cautioning that "what you trade is top end"3. Another writer, who owned and gigged the pedal for several years, points to the standard Boss chassis as "world-renowned for its durability" and attests that it will put up with rough and tumble6. GuitarPlayer's November 2025 guide refers to it simply as "the classic Boss NS-2"7.
A documented user: Alex Rosamilia of The Gaslight Anthem keeps an NS-2 on his board to control unwanted noise from the gain pedals, as shown in Premier Guitar's rig rundown of the band8.
Videos
Sweetwater
Subu Nomo
Guitars, Gear N' Music Channel
Questions
Is the Boss NS-2 analog or digital?
It is an all-analog circuit. Boss describes it as taking a more traditional approach to noise suppression, and says it is most effective for simple, relatively aggressive gating with intuitive features for natural decay. It predates Boss's digital MDP-based NS-1X by decades.
Can I use the Boss NS-2 as a tuner mute?
Yes. The send and return jacks let you attach other effects or a tuner, and Mute mode silences the signal so you can tune quietly. Reviewers also note it can be used to mute a whole section of pedals placed inside its loop.
Does the Boss NS-2 cut my high end?
A Gearnews reviewer found that what you trade with the NS-2 is top end, describing it as a solid all-rounder for classic rock, hard rock and anything where notes are allowed to ring, rather than the best choice for all-round use.
Can I put the NS-2 in my amp's effects loop?
Yes. Guitar World describes using its send/return loop to isolate drives and an amp preamp. One thing to watch: Boss notes the NS-2's maximum input level is +7dBu, so unintentional clipping may occur at the return input stage depending on an amp's send specs.
Is the Boss NS-2 still in production?
Yes. Boss states the NS-2 has been in continuous production since 1987 and remains a best-selling staple of the Boss stompbox series. Boss introduced the digital NS-1X in 2023 as its first new noise suppressor since the NS-2, but the NS-2 is still listed in buying guides.
Sources (8)
- Boss NS-2 Noise Suppressor, Pedal of the Day, 2014-06-24
- The Complete Guide to Noise Gate and Suppressor Pedals, BOSS (articles.boss.info), 2023-11-30
- The 7 Best Noise Gate Pedals of 2026: Not Hiss Problem (or Hers), gearnews.com, 2026-07-27
- Guitar Pedal X, Guitar Pedal X, 2025-05-26
- Tools for the Task: Noise Gate Pedals, Premier Guitar (www.premierguitar.com), 2019-06-14
- Best noise gate pedals 2026: clean up your signal, Guitar World, 2021-03-19
- Best noise gate pedals: control your tone, GuitarPlayer (www.guitarplayer.com), 2024-09-24
- Rig Rundown: The Gaslight Anthem, Premier Guitar, 2014-10-22




Reeves Gabrels

