tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Compressor

Dolamo D-1 Compressor
Photo: Reverb
Dolamo

Dolamo D-1 Compressor

CompressorAnalog
Key facts
TypeAnalog compressor pedal1
CircuitBased on the Dyna Compressor design1
Circuit typeAnalog1
Power6V DC, center negative1
[Current draw](/glossary/current-draw)30mA1
ControlsLevel, Compression1

The Dolamo D-1 Compressor is a compact analog compressor pedal for guitar, described by its maker as "a reliable and versatile compressor"1. It is based on the Dyna Compressor design, a circuit with a long history in compressor pedals, and it is a rehoused version of the Caline Hot Mushroom effects pedal, meaning the same circuit in a different enclosure under the Dolamo name1.

Controls and what they do

The D-1 keeps things simple with two controls:

ControlWhat it does
LevelSets the output volume of the compressed signal
CompressionSets the amount of compression, with what RockBoard's PedalPedia calls "a wide range of compression options"1

RockBoard's PedalPedia describes the result in these terms: "Adding this pedal to your setup will result in a tight, well-defined signal and an overall richness to your sound"1.

Power

The D-1 is specified for 6V DC, center negative1, which is lower than the 9V that most pedalboard power supplies provide. Players will want a supply with a 6V output rather than a standard 9V outlet.

The pedal draws 30mA1, a modest figure that even a single 6V outlet on an isolated supply can handle comfortably.

Videos

Dolamo D-1 Chubby Comp Pedal Compressor Electric Guitar Effect Pedal
Rumblin Man

Questions

What voltage does the Dolamo D-1 Compressor need?

The D-1 runs on 6V DC with a center negative plug, according to the pedal's listing on RockBoard's PedalPedia. That is a lower voltage than the 9V supply most pedalboards are wired around, so players should make sure their isolated supply can deliver a 6V output rather than plugging the pedal into a standard 9V outlet.

Can the Dolamo D-1 run on a 9V adapter?

The listed power requirement is 6V DC center negative, not 9V. Since many pedalboard power supplies only offer 9V outlets, players will want a supply with a 6V output for this pedal. Check the specifications on your power supply before connecting it.

Is the Dolamo D-1 Compressor analog?

Yes. The pedal's circuit type is given as analog, and it is described as being based on the trusted Dyna Compressor design, a classic compressor circuit.

Is the Dolamo D-1 the same as the Caline Hot Mushroom?

The D-1 is described as a rehoused version of the Caline Hot Mushroom effects pedal, meaning the same circuit in a different enclosure under the Dolamo name.

How much current does the Dolamo D-1 draw?

The D-1 draws 30mA, according to its listing on RockBoard's PedalPedia. That is a modest draw well within the capacity of most pedalboard power supply outputs.

Sources (1)
  1. D-1 Compressor by Dolamo, RockBoard PedalPedia, 2026