tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Bass › EBS

EBS MultiComp Studio Edition

EBS MultiComp Studio Edition

Bass
Key facts
TypeAnalog compressor pedal for bass1
MakerEBS2
Original MultiComp introduced19981
Studio Edition2015 revision1
List price£150.00 GBP (as listed, 2026)1
BypassTrue bypass via signal relay switching12
Power9V battery, or 9 to 12V DC supply, 35mA max2
Inputs/outputs1 x input jack (right side), 1 x output jack (left side)2
Dimensions70 x 115 x 35 mm2
Weight400g2
Made inChina2

The EBS MultiComp Studio Edition is an analog compressor pedal for bass, made by EBS, the Swedish bass gear company. What sets it apart from most floor-format compressors is that it offers three different compression modes in one box: a standard compressor, a dualband compressor that processes bass and treble separately, and a tube-simulating mode. The original MultiComp dates back to 1998, and Bonedo's reviewer described it as a long-running top seller in EBS's pedal lineup12.

The Studio Edition is the 2015 revision of the pedal. Compared with the 2008 edition, that line of updates brought 3 dB more headroom, higher sensitivity, and new analog circuitry, and the Studio Edition adds an optimized signal path with a relay switching technique for noise-free bypass12.

Controls and modes

The pedal keeps its control set simple. On top you find a Comp knob, a Gain knob, a Mode switch, an Active/Passive switch, and a Threshold Level Lo/Hi switch. Inside the pedal, trimmers let you fine-tune the threshold for the low band, and that low-band threshold trimmer also affects the full frequency spectrum in Normal and Tubesim modes2.

ControlWhat it does
CompSets the amount of compression
GainSets the output level
ModeSelects Normal, MB, or Tubesim
Active/PassiveMatches the pedal to your bass's output
Threshold Level Lo/HiSets where compression kicks in
Threshold trimmers (internal)Fine-tune the threshold, including the low band

The three modes are the heart of the pedal2:

  • Normal: the standard compressor, which Bonedo's reviewer found gives a transparent bass sound.
  • MB (Multiband): a dualband compressor that processes bass and treble separately, so heavy compression on the low end does not squash the highs.
  • Tubesim: the standard compressor with a tube-like character. The reviewer found it adds overtones, a slight low-mid boost, and rounded highs.

Power and connections

The pedal runs on a 9 Volt battery or a power supply, and accepts voltages from 9 to 12V DC, drawing a maximum of 35mA2. The power supply jack sits on the front face of the pedal, with the input jack on the right side and the output jack on the left2. The higher voltage range means it works with common 9V pedalboard supplies as well as 12V supplies.

Build

The enclosure is glossy black painted metal that Bonedo's reviewer found very stable, with a fourfold screwed bottom plate and thick rubber feet. At 70 x 115 x 35 mm and 400g it is a compact, standard-size pedal, made in China2.

What reviewers said

Bonedo's Rainer Wind reviewed the Studio Edition in November 2015. He found the processed sound always "smooth" and organic, with no pumping effect, and praised the transparent sound in Normal mode, the three compressor modes, the adjustable input sensitivity, the simple operation, and the flawless build quality. His only criticism was that there is no access to Attack and Release settings2.

Videos

EBS MultiComp Studio Edition - demo by Pascal Mulot
EBSSweden
EBS MultiComp Studio Edition - review and sound test
Adam Gordon
EBS MultiComp Studio Edition sound test - awesome analog bass guitar compressor
Adam Gordon

Questions

Does the EBS MultiComp Studio Edition take a battery?

Yes. It runs on a 9 Volt battery or on a power supply, and it accepts anything from 9 to 12V DC through the jack on the front of the pedal. Current draw is a maximum of 35mA, so it is easy on a pedalboard power supply.

Is the EBS MultiComp true bypass?

Yes. The Studio Edition uses a signal relay switching technique that Bonedo's reviewer listed as true bypass, with an optimized signal path for noise-free bypass when the pedal is off. There is also an operating LED so you can see the effect state.

What does the Tubesim mode do on the MultiComp?

Tubesim is the standard compressor circuit given a tube-like character. Bonedo's reviewer found it adds overtones, a slight boost in the low mids, and rounded-off highs, compared with the more transparent Normal mode.

Is the EBS MultiComp analog?

Yes. The MultiComp Studio Edition is an analog compressor pedal. The 2008 revision of the MultiComp already moved to new analog circuitry, and the Studio Edition carries that design forward.

Sources (2)
  1. EBS MultiComp Studio Edition, The Bass Gallery
  2. EBS Multicomp Studio Edition Test, Bonedo (bonedo.de), 2015-11-09

Other bass pedals

All bass pedals