The WET Fuzz is a fuzz pedal from Heather Brown Electronicals, a builder whose earlier releases include the Sensation Fuzzdrive and the Spirit in the Sky fuzz/tremolo. Pedal of the Day describes it as "a non-frills, balls-to-the-wall small box of distorted glory," and notes that the circuit is based on the Russian Bubble Font Big Muff, the compact version of the classic Big Muff fuzz1.
Controls
The WET Fuzz keeps things to three knobs:
| Control | What it does |
|---|---|
| Volume | Increases or decreases the output level |
| Tone | Shapes the brightness or darkness of the effect |
| Sustain | Decides how grungy and dirty you want the fuzz to be |
All three control descriptions come from Pedal of the Day's review1.
Bypass and power
The foot switch does double duty. A short press turns the effect on and off, while holding it selects the bypass mode: a slow LED pulse means the pedal is in buffered bypass, and a fast LED flash means it is in true bypass1. That choice lets you decide whether the pedal's buffer stays in your chain when the effect is off, which matters on larger boards with long cable runs.
Power is a standard +9V DC supply1.
The bypass mode is set by holding the foot switch, not by an internal switch or dip switch. Watch the LED to confirm which mode you are in: slow pulse for buffered, fast flash for true bypass.
Circuit and components
Pedal of the Day highlights the pedal's parts list as "quite a drippy combination of BC547A Fairchild Transistors, 1N4739 Zener, & 1N4148 Silicon Diodes"1. The BC547A transistors do the gain work in the fuzz stages, while the Zener and silicon diodes shape the clipping character of the circuit.
What reviewers said
Pedal of the Day's review, published October 14, 2026, also notes a low-noise floor as a feature of the pedal1. On the overall sound, the reviewer wrote:
"but it works in so many different contexts, that even the most staunch fuzz-haters out there (the crazies) will probably"1
Pedal of the Day, October 14, 20261
The reviewer's point is that the WET Fuzz sits well beyond the niche of dedicated fuzz players, working in many different contexts rather than only in full-on fuzz territory1.
Videos
Pedal of the Day
Questions
How do I switch the WET Fuzz between true and buffered bypass?
Hold down the foot switch to select between the two bypass modes. A slow LED pulse means the pedal is in buffered bypass, while a fast LED flash means it is in true bypass. This lets you choose whether the pedal's buffer stays in your signal chain when the effect is off, which matters for players with long cable runs or many pedals on a board.
What is the Heather Brown WET Fuzz based on?
Pedal of the Day describes the WET as a fuzz based on the Russian Bubble Font Big Muff, the compact green-cased version of Electro-Harmonix's Big Muff circuit. Heather Brown's take is a small box with Volume, Tone and Sustain controls rather than the original's four-knob layout.
What transistors and diodes does the WET Fuzz use?
The pedal uses BC547A Fairchild transistors, a 1N4739 Zener diode and 1N4148 silicon diodes. Pedal of the Day called this combination out in its review as the heart of the pedal's fuzz character.
What power supply does the WET Fuzz need?
The WET Fuzz runs on a standard +9V DC supply. Use a center-negative pedal power supply of the kind found on most pedalboards.
Is the WET Fuzz fully analog?
Yes. Pedal of the Day lists the WET Fuzz as having a 100% analog signal path, with no digital processing anywhere in the circuit.
Sources (1)
- Heather Brown Electronicals WET Fuzz, Pedal of the Day, 2026-10-14
