Brand: Marshall
Features:
- Single button
- Allows you to control your channel
- Black
Details: This single button footswitch from Marshall allows you to control your channel signal.
UPC: 670716003604
EAN: 670716003604
Switching 
Marshall P801
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-10008 or P801 single latching footswitch pedal gives you full control over your amp’s Channel signal. Run your guitar signal through the clean channel for softer passages, then use the P01 to seamlessly switch to the overdrive channel when it’s time to bust out a scorching-hot solo.
Based on 0 reviews
Be the first to review “Marshall P801”
Related products
- Switching
Boss FS5U Unlatched Footswitch
The Boss FS-5U is a compact, lightweight, and durable momentary or non-latching footswitch built to withstand even the roughest and toughest of tours and stages. Plug the FS-5U into any guitar effects pedal that has external footswitch compatibility, and you can engage that pedal’s effect only for as long as you keep your foot on the switch. The FS-5U is the perfect non-latching footswitch for getting those insane solo-punctuating sustains or hitting precisely-timed spot delays.
SKU: n/a - Switching
Ernie Ball Tap Tempo
The Ernie Ball 6186 Tap Tempo is a tiny footswitch pedal specially built to be an auxiliary unit for the Ernie Ball Expression Series Ambient Delay stompbox, but it can also be used with any effects unit that requires a standard normally-open momentary footswitch. It lets you sync effects via tap tempo; you just need to connect it to your delay pedal or other effects then tap the footswitch to set the tempo you want.
SKU: n/a - Switching
BOSS FS6 DUAL FOOTSWITCH
As its name implies, the Boss FS-6 Dual Footswitch is two footswitches in one, combining a latch-type footswitch and an unlatched or momentary-type footswitch in one rugged unit. You can even choose which of the two pedals is latched and which is unlatched, and since both pedals are side by side, you can get even more precise control over the effects pedals you connect to the FS-6. Of course, the Boss FS-6 Dual Footswitch doesn’t just work with pedals; you can also connect it to keyboards, rhythm machines, amps, and more.
SKU: n/a - Midi, Multi-effects, Switching
Boss MS-3 Switcher
The Boss MS-3 Multi-Effects Switcher takes the concept of multi-effects processors and pedalboards to a whole new level. Combining six internal pedal effects and seamlessly integrating with up to three external pedals, the MS-3 is both a multi-effects engine and a multi-pedal switch in one tiny, dedicated unit. The MS-3 also allows you to switch between different amp channels, adjust effects on the fly in real-time, connect compatible MIDI devices, and more without compromising for pedalboard space.
SKU: n/a - Switching
Big Joe B-406
The Big Joe B-406 A/B Switcher does one thing—let you switch between two different channels—and does it really well. It’s simple to operate, the switch is extremely quiet, and is all passive with virtually no additional overall noise. It also has two bright LEDs that indicate which of the two channels are active, so you don’t have to strain your ears to verify that the right amp is engaged while you’re in the middle of a gig.
SKU: n/a
There are no reviews yet.