tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Expression › Mission Engineering

Mission Engineering EP-11

Mission Engineering EP-11

Expression
Key facts
TypeExpression pedal1
MakerMission Engineering1
Designed forAvid Eleven Rack1
ChassisVintage style all-metal expression pedal chassis1
PotentiometerRated at 1 million operations1
OutputExpression pedal output on the left hand side, connects to the Eleven Rack back panel with a stereo TRS cable1

The Mission Engineering EP-11 is an expression pedal built by Mission Engineering for one target: the Avid Eleven Rack, the guitar processor Digidesign released before Avid took the name over. Mission designed it explicitly for the Eleven Rack rather than as a general-purpose expression pedal1. It sits in a vintage style all-metal expression pedal chassis, and the orange Mission EP-11 logo on the front is designed to match the orange color of the Eleven Rack's front panel1.

What it does

An expression pedal sends a control signal, not audio. You plug it into a device's expression pedal input and it lets you change a parameter, such as volume or wah, with your foot while you play. On the EP-11, the expression pedal output is on the left hand side, and it connects to the back panel of the Eleven Rack using a stereo TRS cable1.

The pedal is built around what Mission describes as "a high quality extremely reliable potentiometer that's designed for heavy use and rated at 1 million operations"1. For a player, that rating is the practical difference between a pedal built for constant treadle work and a lighter unit that can develop dead spots over time.

The toggle switch: two configurations

Underneath the treadle there is a small toggle switch that changes the pedal's configuration1. This is the feature that sets the EP-11 apart from a fixed-wiring expression pedal.

Toggle positionWhat it is for
As shippedBest response when connected directly to the back panel of the Eleven Rack1
FlippedUse with a MIDI floor controller, with no rewiring of the pedal1

In the shipped configuration the pedal gives the best response when plugged straight into the Eleven Rack's back panel1. If you later add a MIDI controller to your Eleven Rack, you flip the toggle and use the EP-11 with it, without rewiring the pedal1. Mission notes that the Voodoo Lab Ground Control Pro is one MIDI floor controller very commonly used with the Eleven Rack1.

What it is not

The EP-11 is an expression pedal only, with no simultaneous footswitch function1. If you want a pedal that combines expression with a toe switch, Mission's SP-1 is a switching expression pedal, but it is not compatible with the Eleven Rack's expression pedal input1. For the Eleven Rack specifically, the EP-11's expression-only design is the tradeoff.

Demo video

In Mission's own demo video, James Lebihan of Mission walks through the pedal's chassis, the orange logo matched to the Eleven Rack's front panel, the TRS connection to the back panel, and the toggle switch underneath the treadle, showing both the direct and MIDI controller configurations.

Mission EP-11 demo

Questions

What is the Mission Engineering EP-11 for?

It is an expression pedal designed specifically for the Avid (Digidesign) Eleven Rack. It connects to the Eleven Rack's expression pedal input with a stereo TRS cable and lets you control parameters such as volume or wah with your foot. A toggle switch under the treadle reconfigures it for use with a MIDI floor controller instead.

Can the EP-11 also work as a footswitch?

No. The EP-11 is an expression pedal only, with no simultaneous footswitch function. Mission's SP-1 is a switching expression pedal, but it is not compatible with the Eleven Rack's expression pedal input.

How do I use the EP-11 with a MIDI floor controller?

A toggle switch sits underneath the treadle. As shipped it is set for the best response when connected directly to the Eleven Rack's back panel. If you add a MIDI controller, such as the Voodoo Lab Ground Control Pro, you flip the toggle and the pedal works with it, with no rewiring needed.

Sources (1)
  1. Mission EP-11 Expression Pedal Demo, James Lebihan (YouTube channel), 2010-08-19

Other expression pedals

All expression pedals