The Burn Pile Fuzz Driver is a fuzz pedal from Oneder Effects, built on the fuzz side of the long-discontinued Onederwall. According to the maker, what began as a Muff-style circuit has evolved into a fuzz with endless sounds, and when it gets going, things tend to get a little out of control, celebrating destruction and fun with the chaotic energy of fire1. It sits in the wider family of fuzz pedals alongside Oneder's other designs like the HECKBOY Fuzz and Oscillation Device and the Fuzzhausen.
Controls and features
The Burn Pile's controls are aimed at making a wild fuzz usable in a range of setups1:
- Hi/Lo gain switch: tames the signal so the pedal works with high-output pickups and low end. Oneder Effects says high-output pickups and low-tuned instruments can sometimes slam fuzz pedals, and describes the switch as making the Burn Pile incredibly adaptable1.
- Blend control: lets you mix fuzz against clean signal, a feature the maker highlights for bass players1.
- Mode I: the classic scooped fuzz sound1.
The Burn Pile runs on 9V DC center negative isolated power only. It is not a battery-powered pedal and should be fed from an isolated supply.
Bass players and the Onederwall connection
Oneder Effects describes the Burn Pile as a longtime favorite among bass players, and the Blend control is the reason: mixing clean signal back in helps a fuzz sit in a bass rig1. For more on pedals aimed at low-end players, see Bass Pedals.
The circuit's history ties it to the Onederwall, which the maker describes as long-discontinued. The Burn Pile brings that fuzz circuit back, with the Avocado Sparkle finish and the Burn Pile mascot Burny Sanders, inspired by '90s skateboard graphics, bringing that vibe to life1.
Videos
Oneder Effects
Questions
Can the Burn Pile Fuzz Driver run on a battery?
No. Oneder Effects specifies 9V DC center negative isolated power only for the Burn Pile, so it cannot run on an internal battery and should be fed from an isolated power supply rather than a daisy chain.
Does the Burn Pile have a Hi/Lo gain switch?
Yes. The Hi/Lo gain switch tames the incoming signal so the fuzz works with high-output pickups and low-tuned instruments that would otherwise slam a fuzz circuit too hard. Oneder Effects describes the switch as making the Burn Pile incredibly adaptable.
Is the Burn Pile Fuzz Driver good for bass?
Oneder Effects calls the Burn Pile a longtime favorite among bass players. It includes a Blend control, which lets you mix clean signal back in with the fuzz, a common feature for keeping low end intact under heavy distortion.
Is the Burn Pile a relay bypass pedal?
Yes. The Burn Pile uses clickless relay bypass footswitching, so switching the pedal in and out of the signal path happens without the mechanical click of a conventional footswitch.
What is the Burn Pile based on?
The Burn Pile is based on the fuzz side of the long-discontinued Onederwall. Oneder Effects says the circuit began as a Muff-style design and evolved into a fuzz with endless sounds.
Sources (1)
- Burn Pile Fuzz Driver, Oneder Effects
