tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Boost › T-Rex

T-Rex Moller 2

T-Rex Moller 2

Boost
Key facts
TypeOverdrive pedal with clean boost1
MakerT-Rex
GenerationSecond generation of the Moller overdrive, first version created in 20031
BypassTrue bypass1
PowerAdapter or battery1
BoostUp to 20dB of clean boost1

The T-Rex Moller 2 is a classic overdrive pedal with a built-in clean boost, made by T-Rex. It is the second generation of the Moller overdrive, which first appeared in 2003, and it is named after the Danish guitarist Knud Møller1.

The circuit is based on the T-Rex Alberta overdrive, a tube screamer design that Bax Music's product specialist Harry Maes described as "very dynamic and warm sounding"1. What sets the Moller 2 apart from a straight overdrive is its boost function: a switchable clean boost of up to 20dB, aimed at lifting solos above the band1.

What it does

The Moller 2 combines two functions in one box. The overdrive side is built on the Alberta circuit, so it behaves like a tube screamer: a warm, dynamic drive rather than a high-gain distortion1. On top of that sits a clean boost of up to 20dB, which you can switch in when you need to cut through for a solo1.

The pedal uses true bypass, so it leaves your dry signal alone when it is off, and it can be powered with an adapter or a battery1.

Controls and switching

  • Mix control: balances between the clean signal and the overdriven signal, so you can keep some of your original tone under the drive1
  • Right footswitch: activates the boost function1

The Mix control is the feature that separates the Moller 2 from a standard tube screamer layout. Instead of only a tone and level arrangement, you can dial in how much of your untouched signal sits alongside the driven one, which is useful for keeping low-end definition at higher drive settings1.

Where it came from

The original Moller overdrive was created in 2003, and the Moller 2 is its second generation1. The circuit traces back further, to the T-Rex Alberta II's predecessor, the Alberta overdrive/tube screamer, which the Moller 2 is based on1. The pedal takes its name from the Danish guitarist Knud Møller1.

Demo

In Bax Music's demo video from June 2013, Harry Maes demonstrates the Moller 2 through a Yamaha Pacifica 611 fitted with Seymour Duncan pickups, a P90 in the neck and a Custom Five in the bridge1. He walks through the overdrive sound, the Mix control's blend of clean and driven signal, and the boost function on the right footswitch1.

Bax Music demos the T-Rex Moller 2

Videos

Kristian T-Rex MØLLER 2
T-Rex Effects
The Møller 2 Drive from T-Rex - Product video
T-Rex Effects
Sources (1)
  1. T-Rex Moller 2 Classic Overdrive Pedaal Met Clean Boost Review, Bax Music (Bax-shop channel), 2013-06-11

Other boost pedals

All boost pedals