The Valeton AD-10 is a compact analog delay pedal built around a dual BBD chipset, which Valeton describes as recreating "the iconic, vintage delay sound." Bucket-brigade devices, or BBDs, are the chips that vintage analog delays used to produce their darkening, soft-edged repeats, and the AD-10 uses two of them in its 100% analog signal path. Valeton characterizes the tone as "warm, sweet analog delay tone." The pedal is discontinued, per Valeton's own product page1.
Controls and what they do
The AD-10 keeps its control set simple, in the manner of classic analog delays. Valeton's page details one control1:
With a 300ms maximum delay time, the AD-10 is aimed at short, vintage-style repeats rather than long, ambient delay lines. The REPEAT RATE knob controls the delay time. Players who want more control can look at a digital modeling delay instead, such as the Valeton Coral Echo II in the same maker's range1.
How it compares
The most direct point of comparison is the Maxon AD10 Analog Delay, another BBD-based analog delay. The Maxon tops out at 600ms of delay time, twice the AD-10's 300ms, according to Delicious Audio's buying guide213. Both take the same general approach: an all-analog signal path and a compact enclosure, with the Maxon offering the longer maximum delay at a higher position in the market. The Maxon AD10 has drawn its own share of press coverage: Performer Mag published a review of the pedal, Delicious Audio reviewed it alongside Maxon's ASC10 stereo chorus, and Godlyke, its US distributor, announced its release456.
The AD-10 is discontinued. Valeton's product page for it is published under a discontinued designation, so it no longer appears in the company's current lineup1.
Build and power
Valeton specifies a zinc-alloy die cast casing "to withstand wear and tear," and the pedal's footprint is small at 94mm deep by 48mm wide by 39mm high, weighing 280g1. That puts it among the smallest footprints a delay pedal can have, which matters on a crowded board. Current consumption is listed at 22mA, a light draw that suits a shared pedalboard supply, and the buffer bypass design means the pedal stays in the signal path even when off1.
Videos
Valeton
Yet Another Guitar Channel
accordoTV
Questions
Is the Valeton AD-10 true bypass?
No. Valeton specifies the AD-10 as buffer bypass rather than true bypass. In a buffered bypass circuit the signal still passes through a buffer when the effect is off, which keeps the delay's BBD chips in the circuit path design consistent with other vintage-style analog delays. Players who prefer a strictly true bypass chain should account for the buffer when placing the AD-10 on a board.
How long is the delay time on the AD-10?
The AD-10's maximum delay time is 300ms, according to Valeton's product page. The REPEAT RATE control sets the delay time within that range. That is shorter than some other analog delays on the market, such as the Maxon AD10, which offers a 600ms maximum delay time.
Is the Valeton AD-10 fully analog?
Yes. Valeton describes the AD-10 as having a 100% analog signal path, built around a dual BBD chipset intended to recreate a vintage delay sound. There is no digital conversion in the audio path, which is what gives bucket-brigade delays their characteristic darkening repeats.
How much current does the AD-10 draw?
Valeton lists the AD-10's current consumption at 22mA. That is a modest draw by pedal standards, so it can share a standard 9V DC power supply with other low-draw pedals, subject to the supply's total available current.
Is the Valeton AD-10 discontinued?
Yes. Valeton's own product page for the AD-10 is published under a discontinued designation, dated July 2026. The pedal is no longer part of the company's current lineup, though it may still be found secondhand or in remaining retail stock.
Sources (6)
- AD-10 - VALETON, Valeton, 2026-07-24
- 2023 UPDATE: The Best Analog Delay Pedals (Mono & Stereo), Delicious Audio, 2024-01-04
- ANALOG DELAY (AD10), Godlyke Distributing, Inc.
- Maxon Analog Delay (AD10) Pedal Review, Performer Mag, 2013-10-10
- Pedal Reviews: Maxon AD10 Delay And ASC10 Chorus, Delicious Audio, 2013-08-30
- Godlyke Announces Release of Maxon AD10 Analog Delay and ASC10 Stereo Chorus, Guitar Interactive Magazine, 2013-06-28
