The Valeton BD-10 is a compact overdrive pedal from Valeton, billed by the maker as a "Blues OD" and described as delivering rich, full-range grit1. It runs a 100% analog signal path and is now discontinued: Valeton's own product page marks it as such, so it turns up mainly secondhand or in leftover stock1. The user manual remains available for download on Valeton's product page1.
The controls
The BD-10 keeps things to the standard three-knob overdrive layout, so anyone who has used a distortion or overdrive pedal before will feel at home straight away1.
| Control | What it does |
|---|---|
| GAIN | Controls the gain |
| LEVEL | Controls the output volume |
| TONE | Controls the brightness |
Valeton does not publish deeper voicing details for the BD-10, so the knobs do what the names suggest and nothing more. Players who want more shaping options in a similar compact format can look at other pedals in Valeton's line, such as the Valeton Tube Engine or the Valeton Tube Refiner.
Bypass, power and build
The BD-10 uses buffer bypass rather than true bypass, according to Valeton's specification1. In practice that means a buffer stays in the signal path whether the effect is on or off, which some players like for preserving tone over long cables and others prefer to avoid on a minimal board.
Power is 9V DC center negative with a current draw of 15mA1. That is a light load, easy on a standard pedalboard power supply.
The casing is zinc-alloy die cast, which Valeton says is built "to withstand wear and tear"1. At 280g and with a 48mm-wide footprint, it is a small, light pedal that fits easily into tight spots on a board1.
The BD-10 is discontinued, so availability depends on remaining stock or the secondhand market. Valeton still hosts the user manual on its product page1.
Videos
Valeton
Alan Sunét
Shari Pedals
Questions
Is the Valeton BD-10 discontinued?
Yes. Valeton's own product page marks the BD-10 as discontinued, so new units are no longer being made. The page still carries the user manual for download, which is useful if you pick one up secondhand and want the official documentation.
Is the Valeton BD-10 true bypass?
No. Valeton specifies buffer bypass, meaning the signal passes through a buffer when the pedal is switched off rather than being hard-wired straight through. That can help drive long cable runs, but players who want a strictly untouched signal path should know it is not true bypass.
Is the Valeton BD-10 analog?
Yes. Valeton describes the BD-10 as having a 100% analog signal path, so the overdrive is produced entirely in the analog domain with no digital conversion anywhere in the circuit.
How big is the Valeton BD-10?
Valeton lists the BD-10 at 94mm deep by 48mm wide by 39mm high, weighing 280g. That is a compact footprint by pedal standards, so it takes up little room on a board, and the zinc-alloy die cast casing is built to handle wear and tear.
Sources (1)
- BD-10 - VALETON, Valeton, 2026-07-24
