The Electro-Harmonix 95000 Performance Loop Laboratory is a six-track looper pedal, introduced in 2018 as the company's most advanced looper to date. Each loop holds six mono tracks plus one stereo mixdown track, recorded as 44.1kHz digital audio, which puts it closer to a small multitrack recorder than a typical stompbox looper1234.
Electro-Harmonix built it for players who want to build complete loop performances on one unit: layer parts on separate tracks, mix them down, sync to MIDI clock, and store the results on a memory card. Guitar World's reviewer later described the EHX looper line as running "from the basic Nano Looper 360 right up to the spaceship dashboard 95000 model"5. The product page now marks the 95000 as discontinued in 20261.
What the 95000 does: a six-track performance looper
Each loop on the 95000 contains six mono tracks and one stereo mixdown track, so you can record parts separately rather than stacking everything into a single overdub layer18. Loops are stored on a microSDHC card in a dedicated slot, and the pedal shipped with a 16GB card providing up to 375 minutes of recording time and up to 100 loops842.
Recording runs in either Quantize or non-quantize (free running) modes, so loops can snap to a tempo grid or stay loose1. The unit also offers Punch-In recording alongside standard Record and Overdub modes1. Gearnews noted at launch that you could sync multiple units together "for even more looping mayhem"4.
The 95000 sits at the top of a range of EHX loopers that includes the compact Electro-Harmonix 720 Stereo Looper, the Nano Looper 360 and the earlier 45000 Multi-Track Looping Recorder, which was itself discontinued in 2024.
The controls and footswitches
The 95000 carries six footswitches in a rugged aluminum chassis, with a control layout optimized for both floor and tabletop use13. The control surface sits at a 10 degree angle while the footswitches are set at a steeper 25 degree angle, keeping them reachable from either position2.
| Footswitch | What it does |
|---|---|
| RECORD | Enters or exits one of the recording modes: Record, Overdub, or Punch-In, depending on the current mode1 |
| PLAY | Toggles playback on and off1 |
| TRACK | Advances tracks, erases tracks, or erases an entire loop1 |
| UNDO | One level of undo/redo per track, independent per track1 |
| LOOP UP / LOOP DOWN | Increments or decrements loop selection; press and hold to advance faster1 |
The knob controls cover input and monitoring:
- INPUT LEVEL L and R: adjust the amplitude of the left and right input signals before the A/D converter1
- DRY OUTPUT faders and pan knobs: monitor your instrument while recording or play along with an existing loop1
- CLIX LVL: sets the volume of the CLIX metronome in the monitoring chain1
- HEADPHONE LVL: adjusts the rear Headphone Output and Monitor Out jacks1
- MASTER LVL: master volume for all signals and output jacks, including loop, dry and CLIX levels1
The display works in pages: the LOOP/DUB page shows the current loop number and the active track's overdub feedback level, the BARS/BEATS page shows the loop position in bars and beats, and the MIDI CH/SYNC page adjusts the MIDI channel and sync options1.
Inputs, outputs, MIDI and USB
The rear panel is where the 95000 earns its "mini studio" reputation. MusicRadar described it at launch as "a foot-controlled mini studio"16.
Inputs:
- L and R INPUT combo jacks: accept either XLR or 1/4-inch connectors; each input handles a microphone (phantom power included), an instrument, or an unbalanced line signal12
- AUX IN: a 3.5mm stereo input mixed with the stereo output in the analog domain, sent to the L and R outputs, Headphone jack and Monitor Out1
- EXPRESSION PEDAL jack: accepts an expression pedal with a 1/4-inch TRS plug to control the master level of the loop audio1
Outputs:
- L and R OUTPUT jacks: the main stereo outputs1
- MONITOR OUT: produces a mono version of the signal at the headphone jack1
- HEADPHONE jack: 1/4-inch stereo1
MIDI and USB:
- MIDI IN: a standard 5-pin DIN connector receiving MIDI Clock, Control Change (CC) and Program Change (PC) messages1
- MIDI OUT: a standard 5-pin DIN connector; the 95000 offers MIDI clock sync as both master and slave12
- EXT. CLOCK button: synchronizes the unit with external MIDI Clock at the MIDI IN jack, cycling through Punch, Quantize, Oct and Reverse sync modes1
- USB connector: interfaces the 95000 with a computer1
The 95000 runs on the included 9.6VDC 500mA EHX adapter through its 9VDC power jack, and draws 320mA. That rules out a standard 9V battery and means it needs its own supply rather than a shared daisy chain17.
How it compares
The obvious rival is the tabletop Boss RC-505 Loop Station. In MusicRadar's review of the Boss RC-505 MkII, the reviewer compared the two directly: the six-track Performance Loop Laboratory "hosts a not-dissimilar feature set, with footswitches that give it some floor-based functionality" the Boss unit lacks, but "less visual feedback and no effect section(s) makes this a more raw looper, though there's plenty of flexibility via the USB, MIDI and SD card slot"7.
In other words, the 95000 trades the RC-505's screen and built-in effects for a more open-ended connection to a computer, MIDI rig and storage card, in a chassis that works on the floor as well as on a table7.
Videos
Premier Guitar
EHX
EHX
Questions
Is the Electro-Harmonix 95000 discontinued?
Yes. Electro-Harmonix's product page marks the 95000 Performance Loop Laboratory as discontinued in 2026. It was released in 2018 at a US street price of $550, and secondhand units are the way to find one now.
How many tracks does the 95000 record per loop?
Each loop holds six mono tracks plus one stereo mixdown track, recorded at 44.1kHz. A 16GB microSDHC card (one was included) stores up to 100 loops and up to 375 minutes of recording time.
Does the 95000 sync to MIDI clock?
Yes. The EXT. CLOCK button synchronizes the unit with MIDI Clock messages at the MIDI IN jack, with sync modes tied to the Punch, Quantize, Oct and Reverse buttons. MIDI clock sync works as both master and slave, and MIDI IN also receives Control Change and Program Change messages.
Can you use the 95000 on a tabletop?
Yes. The control layout is optimized for both foot pedal and tabletop use, with the control surface set at a 10 degree angle and the footswitches at a steeper 25 degree angle, so the switches stay reachable from either position.
Does the 95000 provide phantom power for microphones?
Yes. Both audio inputs are combo jacks accepting XLR or 1/4-inch connectors, and each can handle a microphone with phantom power included, as well as an instrument or unbalanced line input.
What memory card does the 95000 use?
It uses a microSDHC memory card, inserted into a dedicated slot to store loops. A 16GB card was included with the pedal, providing up to 375 minutes of recording time and up to 100 loops.
Sources (8)
- 95000 | DISCONTINUED 2026 | Performance Loop Laboratory - Electro-Harmonix, Electro-Harmonix
- NAMM 2018 first look video: Electro-Harmonix's 6-track 95000 looper is like a foot-controlled mini studio, MusicRadar, 2018-01-19
- Electro-Harmonix Announces New 95000 Performance Loop Laboratory, Guitar World, 2018-01-18
- NAMM 2018: Electro-Harmonix 95000 Performance Loop Laboratory, gearnews.com, 2018-01-19
- Electro-Harmonix 720 Stereo Looper review, Guitar World, 2021-09-07
- Electro-Harmonix Launches 95000 Loop Laboratory, Premier Guitar, 2018-01-18
- Boss RC-505 MkII review, MusicRadar, 2022-02-28
- Electro-Harmonix releases new multi-track looper, Guitar.com, 2018-01-19









