tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Boost › GUP Tech

GUPTech FrAG Boost
Photo: GUPTech

GUPTech FrAG Boost

Boost
Key facts
Typeboost/preamp pedal1
MakerGUPtech, handmade in Québec1
Power9V DC center-negative, no batteries, 3 mA current draw1
BypassTrue Bypass1
Price£88.00 GBP (as listed by the maker, 26 October 2026)1

The GUPtech FrAG Boost is a boost/preamp pedal designed to push the front end of your amp into sharp, cutting high-gain territory while keeping your tone tight and articulate. GUPtech calls it one of its most brutal and flexible boost/preamp pedals to date, and describes the result as rich harmonics, no more flubby low-end, and super sharp and crisp metal tones1.

What it does to your sound

GUPtech positions the FrAG Boost as a tool for players who want more aggression from their amp rather than a standalone distortion. The maker says the pedal "gives you that presence and depth, like stacking two great boosts in one box"1. Used in front of a driven amp, it is meant to tighten the low end and sharpen the attack, which is why GUPtech describes the outcome as "rich harmonic, no more flubby low-end, super sharp and crisp metal tones"1.

The Glow in the Dark edition carries the same description, and GUPtech suggests using it "as a preamp boost to any high gain pedals or amps to kick your tones"2. That makes it a front-of-amp boost in the same family as the GUPtech Slime Mid-Boost, the GUPtech Le Chiou EQ-Boost and the GUPtech Peeps Clean Boost, though the FrAG is the one aimed squarely at high-gain and metal players. For more on the category, see Boost Pedals.

Controls

The FrAG Boost keeps things simple with two knobs12:

ControlWhat it does
VolumeA classic 0 to full-on boost to slam your amp front end2
DriveAdds a bit of crunch and grit, taking you from clean grind into overdriven territory1

The Volume knob sets how hard the pedal hits the amp's input, while the Drive knob lets you add grit within the pedal itself before the signal ever reaches the amp.

Power and bypass

The FrAG Boost runs on 9V DC center-negative power and takes no batteries1. GUPtech lists the current draw at 3 mA1, which is light enough for any output of a standard pedalboard power supply, including shared outputs. The pedal is true bypass, so it stays out of your signal path when switched off1.

There is no battery option: the pedal powers only from a 9V DC center-negative supply1.

Editions and availability

GUPtech offers the FrAG Boost in Neon Yellow Gray and Neon Yellow color options1. A limited Glow in the Dark edition was released in October 2026 with the same circuit as the original, hand-built in Saguenay, Quebec2. There is also a Gold Tone Rush edition, which GUPtech describes as a Metal Boost; it was listed as sold out as of 26 October 20263.

Where it comes from

GUPtech builds the FrAG Boost by hand in Saguenay, Québec, Canada, and the maker states that all of its pedals are made by the company there13. The Glow in the Dark edition page repeats the point: "Like all GUPTech gear, it's hand-built in Saguenay, Quebec"2.

Videos

Guptech Frag Pedal: The Low End Tamer!
Derryl Vi and GUPtech
GUPTech FrAG Boost 💥 Budget Metal Boost Pedal That SLAPS!
EveryTis

Questions

Does the GUPtech FrAG Boost take a battery?

No. GUPtech specifies 9V DC center-negative power with no battery option, on the original FrAG Boost and the Glow in the Dark edition alike. Plan a standard 9V pedalboard power supply output for it, and note that the pedal draws only 3 mA, so it sits comfortably on a shared supply.

Is the GUPtech FrAG Boost true bypass?

Yes. GUPtech lists the FrAG Boost as true bypass, so when the pedal is off, your guitar signal passes through without the circuit loading it. The Glow in the Dark edition is specified the same way.

What power supply does the FrAG Boost need?

The FrAG Boost runs on 9V DC center-negative power and takes no battery. GUPtech lists the current draw at 3 mA, which is very light, so almost any pedalboard power supply output can handle it.

Where is the GUPtech FrAG Boost made?

GUPtech builds the FrAG Boost by hand in Saguenay, Québec, Canada. The maker states that all of its pedals are made by the company there, and the product pages describe the pedal as handmade in Québec.

What is the Gold Tone Rush edition of the FrAG Boost?

The Gold Tone Rush edition is a version of the FrAG Boost that GUPtech describes as a Metal Boost. As of late October 2026 it was listed as sold out on the maker's site. Like the rest of the range, it is made in Saguenay, Québec, Canada.

Sources (3)
  1. FrAG Boost Pedal, GUPtech (guptech.ca)
  2. FrAG Boost Pedal, GUPtech (guptech.ca), 2026-10
  3. FrAG Boost Pedal, guptech.ca

Other boost pedals

All boost pedals