The Revelator is a Throne Room Pedals dirt box that covers boost, overdrive, distortion and fuzz in one pedal, which Pedal of the Day called "about as versatile as you can get with a boost-overdrive-distortion-fuzz pedal"1. Its trick is a three-way toggle that swaps between silicone, germanium and IC-based distortion tones, so one knob set can produce three different clipping characters1.
What it does
The front panel carries the usual Volume, Gain and Tone knobs, plus the 3-way toggle that sets the clipping type1. How it behaves depends on where the Gain and toggle sit:
- Gain down: a clean boost1
- Toggle in the middle: a large volume boost that will overdrive a tube amp or lift a solo2
- Silicone or Germanium selected: fuzzy, creamy, overdriven distortion, with a tinge of fuzz once Gain passes 3:001
- IC selected: smooth drive with long sustain1
Pedal of the Day's reviewer, Mike B, found the IC position the standout:
"The IC toggle is the one that really shines, in my opinion, cutting through any mix you can throw at it. Great, smooth drive, with loads of sustain for days, this selection brings out the best in the Revelator."
His overall verdict: "This pedal is extremely useful in many different sonic situations, and can absolutely be dialed in to fit your needs."1
Build and power
The Revelator is built in a compact enclosure, 4.49 x 2.75 x 1.92 inches and 8.2 oz, with a double durable powder coated finish and military grade point-to-point wiring inside1. Jacks are Neutrik 1/4", and a gold LED shows the effect state1.
The pedal takes 9V DC center negative power1, the common standard, so it fits a typical pedalboard supply. No battery option is listed, so plan on a power supply or isolated output.
Switching is true bypass1, so the signal passes uncolored when the pedal is off.
Videos
throneroompedals
throneroompedals
Questions
Is The Revelator true bypass?
Yes. The Revelator uses true bypass switching, so with the pedal off your signal passes through without the circuit coloring it. It also has a gold LED to show when the effect is engaged.
What power supply does the Throne Room Pedals Revelator need?
It runs on 9V DC with a center negative plug, the same standard supply as most modern pedals. That means it works with a typical pedalboard power brick or a standard 9V adapter wired center negative.
Can The Revelator work as a clean boost?
Yes. Turn the Gain down and it works as a clean boost, and with the toggle in the middle position you get a large volume boost that can push a tube amp into overdrive or lift a solo above the mix.
How big is the Throne Room Pedals Revelator?
It measures 4.49 x 2.75 x 1.92 inches and weighs 8.2 oz, roughly standard compact-pedal size. The enclosure has a double durable powder coated finish and military grade point-to-point wiring inside.
What do the Silicone, Germanium and IC settings sound like?
The silicone and germanium settings give a fuzzy, creamy, overdriven distortion, with a tinge of fuzz when Gain goes past 3:00. The IC setting is smoother with long sustain, and the reviewer at Pedal of the Day found it the standout for cutting through a mix.
Sources (2)
- Throne Room Pedals The Revelator Distortion, Pedal of the Day, 2014-05-03
- The Revelator Distortion, Revival Engineering (throneroompedals.com)


