The Big Joe R-403 Vintage is an overdrive pedal from Big Joe Stomp Box Company. Big Joe describes it as delivering "syrupy smooth warm tube dynamics with plenty of bark," a box "reminiscent of vintage tube amps pushed to their limits"1. Pedal of the Day's review agrees, writing that "the tones it creates are reminiscent of vintage tube amps pushed to their limit"2.
The pedal is built around three knobs and a toggle, and it responds to how you play it: Pedal of the Day notes that it "relies heavily on your pick attack for its tonal production," so digging in changes the character of the drive rather than just the volume2.
Controls and what they do
The R-403 Vintage keeps its control set simple. Pedal of the Day found that "the Output, Gain and Presence knobs give you a wide range of sounds to work with and explore"2.
| Control | What it does |
|---|---|
| Output | Sets the overall level leaving the pedal12 |
| Gain | Sets the amount of overdrive12 |
| Presence | Shapes the high end and cut12 |
| 2-position toggle | Adds a low end boost, which Big Joe describes as "similar to a close miked amp"1 |
The toggle is the one voicing switch on the pedal. Pedal of the Day calls it a Shape toggle that "provides you with additional low end boost, similar to a close-miked amplifier"2, which is useful if the pedal is sitting in front of a bright amp or a small speaker that loses bottom end.
Power and connections
The pedal runs from a 9V battery or a 9V DC power supply with a 2.1 mm x 5.5 mm barrel connector, polarity negative inside; the supply is not included1. Pedal of the Day adds that "it can run at 9V or 18V, if you're needing a bit more headroom and clarity in your signal"2, so players who want a more open, less compressed feel at higher gain settings have that option.
The 18V option comes from the press review, not the maker's product page, which lists only 9V battery and 9V DC supply operation. If you run it above 9V, check your power supply's compatibility with the pedal's requirements before plugging in.
Connection is straightforward: a single 6.3 mm mono input and a matching output, so it sits anywhere in a standard pedalboard chain1.
Build and where it sits in the Big Joe lineup
The R-403 Vintage is housed in what Pedal of the Day calls "the tough-as-nails enclosures that Big Joe has become known for"2. At 5.5" x 4" x 2.5" and 22 oz, it is a full size enclosure rather than a mini pedal1.
The R-403 sits in Big Joe's R series alongside the R-401 Saturated, R-402 Classic, R-404 Vintage II and R-405 Hard. The R-404 Vintage II is the follow up to this pedal's voicing, and the company's B series covers further overdrive and distortion options, including the B-301 Tube, B-302 Rock, B-309 Texas Screamer, B-402 Classic, B-404 Vintage II and B-502 Empire.
What reviewers said
Pedal of the Day reviewed the R-403 Vintage in January 2020 and was positive about its responsiveness2:
"Extremely transparent and responsive, the R-403 Vintage Overdrive"
The same review highlights the pick attack sensitivity and the range available from the three knobs, and describes the pedal as "a monster" in the overdrive category2. The review's overall picture is of a drive pedal that cleans up and responds like a pushed tube amp rather than a fixed, compressed distortion.
Videos
ProGuitarShopDemos
Pedal of the Day
Mychael Allen
Questions
Is the Big Joe R-403 Vintage true bypass?
Yes. Big Joe Stomp Box Company lists the R-403 Vintage as true bypass, so with the pedal off your signal passes through without buffering or coloring from the circuit.
Does the R-403 Vintage take a 9V battery?
Yes. The maker's product page specifies power from a 9V battery or a 9V DC power supply with a 2.1 mm x 5.5 mm barrel connector, center negative polarity. The power supply is not included with the pedal.
What does the low boost toggle do on the R-403?
The two-position toggle adds a low end boost that Big Joe describes as similar to a close miked amp. Pedal of the Day's review calls it a Shape toggle that gives additional low end, like a close miked amplifier tone.
Can the R-403 Vintage run at 18V?
Yes. Pedal of the Day notes it can run at 9V or 18V, with 18V an option if you want more headroom and clarity in your signal. The maker's own page lists 9V battery or 9V DC supply operation.
Sources (2)
- R-403 VINTAGE (9V-18V), Big Joe Stomp Box Company
- Big Joe Stomp Box Co. R-403 Vintage Overdrive, Pedal of the Day, 2020-01-02









