The Big Joe R-405 Hard is an overdrive pedal from Big Joe Stomp Box Company. The maker describes it as a "9V Steroid stack overdrive crunch with incredible sustain and harmonics" and sums up its character as "pure metallic muscle"1. What sets it apart from most overdrives at its price is its EQ section: instead of a fixed tone knob, it carries a full parametric EQ aimed at the midrange.
The controls: Presence, Output and a parametric mid EQ
The R-405 Hard keeps its control set short. Big Joe lists three elements: a Presence control, an Output control, and a Variable parametric EQ1.
| Control | What it does |
|---|---|
| Presence | Sets the high-frequency character of the drive |
| Output | Sets the overall level leaving the pedal |
| Variable parametric EQ | Shapes the midrange |
The parametric EQ is the working center of the pedal. Big Joe describes it as "a full parametric EQ with a sweepable mid-frequency and an adjustable boost/cut control"1. In practice that means two things a fixed tone knob cannot do: you choose which mid frequency the EQ acts on, and then you choose how much to boost or cut at that point. A player chasing a scooped sound can pull the offending midrange down, and a player who needs to cut through a band mix can push a narrow band up instead of raising the whole signal.
For players comparing circuits, this mid-focused EQ approach differs from the fixed tone stacks on most overdrives, including Big Joe's own B-series pedals such as the B-402 Classic and B-404 Vintage II, and from the R-series R-401 Saturated and R-403 Vintage.
Power and connections
The pedal runs on a 9V battery or a 9V DC power supply through a 2.1 mm x 5.5 mm barrel connector with negative polarity on the inside pin; the supply is not included1. It also supports 12V and 18V operation1, which gives it more headroom than a 9V-only design when fed a higher voltage from a suitable supply.
The 12V and 18V support requires a power supply that can deliver those voltages. A standard 9V daisy chain will run the pedal at 9V only.
Audio connections are a single 6.3 mm mono jack input and a matching mono output1, and the pedal is true bypass, so the signal passes through unprocessed when the effect is off1.
Videos
Big Joe Stomp Box Company
GoDpsMusic Live
Questions
Is the Big Joe R-405 Hard true bypass?
Yes. Big Joe Stomp Box Company lists the R-405 Hard as a true bypass pedal, so with the effect switched off your signal passes through without the circuit coloring it.
Does the Big Joe R-405 Hard take a 9V battery?
Yes. The maker's product page specifies power from a 9V battery or a 9V DC power supply through a 2.1 mm x 5.5 mm barrel connector with center negative polarity. The power supply itself is not included with the pedal.
What power supply does the R-405 Hard need?
It runs on a 9V DC supply with a 2.1 mm x 5.5 mm barrel connector, polarity negative inside, and it also supports 12V and 18V operation. Higher voltages generally give an overdrive more headroom before it breaks up.
How big is the Big Joe R-405 Hard?
The enclosure measures 5.5 inches long by 4 inches wide by 2.5 inches high and weighs 22 oz, so it is a mid sized pedal that takes up a noticeable slice of a small pedalboard.
Sources (1)
- R-405 HARD (9V-18V), Big Joe Stomp Box Company








