tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Reverb › EBS

EBS DynaVerb Limited Spring Edition
Photo: EBS

EBS DynaVerb Limited Spring Edition

ReverbDigital
List price
$349
Key facts
TypeDigital stereo reverb pedal, 24-bit processing42
MakerEBS3
ReleasedJune 2023, available from June 202332
Power9-18V DC regulated, 80 mA max2
BatteryInstallation option available, external power supply recommended3
Dimensions2.8" x 4.5" x 1.4" (70mm x 115mm x 35mm)2
Weight245g (0.54 lb.), reduced from 400g on the previous version35

The EBS DynaVerb Limited Spring Edition is a digital stereo reverb pedal from EBS, released in June 2023 as a special edition of the EBS DynaVerb12. It is built for bass players first, but EBS says it can enhance any instrument from guitar to keyboard and even vocals with its studio-quality full-range sound3. What sets it apart from the standard DynaVerb is its reverb menu: it keeps the original six hall and room types and adds three more, a spring, a gated and a reverse reverb4.

EBS describes the pedal as a "High Dynamics Stereo Reverb with 24-bit digital processing circuitry"4, and the maker says that 24-bit processing offers outstanding sound quality on stage and in the studio3. Bass Gear Magazine's reviewer Dan Veall put it more concretely: "24bit processing at 48kHz offers supremely high-resolution audio for pristine and realistic spatial effects"2.

Reverb types: hall, room, reverse, gated and spring

The Limited Spring Edition carries nine reverb types in total: three hall, three room, and one each of reversed, gated and spring2. EBS frames the edition as adding Spring, Gated, and Reversed reverbs to the original six Room and Hall types of the standard DynaVerb4.

Type groupWhat it gives you
3 Hall reverbsRange from a 1.5s small space to seven seconds of "deep and rich cathedral spaciousness"2
3 Room reverbsRealistic room settings, including the Type switch center "RM" position for adding "live studio" ambience to DI'd bass2
ReversedA gentle reverse reverb effect2
GatedGated reverb for those '80s synth-pop drum sounds2
SpringAn articulate spring reverb2

The hall range is worth noting for bass players: a 1.5-second small space is short enough to sit under a bassline without washing it out, while the seven-second cathedral tail is there when you want full ambient sprawl2.

Controls and how it works

The control set is deliberately small. Four controls are listed: Reverb depth, Tone, a Type switch and a secondary modes switch2.

  • Reverb knob: the left-hand knob dials in the "intensity" of the effect2
  • Tone: adjusts the overall "hardness" of the space the effect is emulating; progress it anti-clockwise for a darker reverb tail2
  • Type switch: selects between the reverb families, with the center "RM" position giving a realistic room setting for adding "live studio" ambience to DI'd bass2
  • Secondary modes switch: accesses the further variations within each type2

Inside the pedal there is also an internal switch that allows it to be set to parallel mode if desired3. That is a meaningful option for bass: running the reverb in parallel with your dry signal keeps the fundamental intact rather than sending the whole signal through the effect.

Sound quality and specifications

Bass Gear Magazine's review carried a full specification list, which gives a picture of the pedal's audio performance2:

SpecificationValue
Circuit topologyDigital, 24-bit2
Sampling frequency48kHz2
Dynamic range107 dB A-weighted2
Reverb bandwidth+0/-3 dB, 20Hz to 20kHz2
Dry bandwidth+0/-3 dB, 20Hz to 20kHz2
Tone low pass filtermin/max, 1/20kHz2
Input impedance1 Mohms stereo, 500 Kohms mono2

The full-range dry and reverb bandwidths, 20Hz to 20kHz, line up with EBS's claim of studio-quality sound in full range32.

Power, size and weight

The pedal requires 9-18V DC power and draws 80 mA max2. A battery installation option is available, but EBS strongly recommends using an external power supply for optimal performance3.

The DynaVerb draws 80 mA max on 9-18V DC regulated power, so it runs on most isolated pedalboard supplies; supplies set outside the 9-18V range are not compatible with it2.

The enclosure measures 2.8" x 4.5" x 1.4" (70mm x 115mm x 35mm) and weighs 245g (0.54 lb.)2. EBS reduced the weight from 400g to 245g compared to the previous version, a change Premier Guitar also reported at the time of the release35.

Where it came from and how it differs from the alternatives

EBS announced the DynaVerb Limited Spring Edition in June 2023, alongside the relaunch of the UniChorus Studio Edition as a Rev 2 version, with both pedals available from June 20233. Bass Gear Magazine later noted that both pedals "have been enjoying success beyond the bass world"2.

The standard EBS DynaVerb offers the six room and hall types; the Limited Spring Edition is the version to pick if you want the spring, gated and reverse effects4. EBS also makes a DynaVerb Guitar Edition, a digital reverb pedal offering a choice of Hall, Plate and Room reverbs, with three plate variations ranging from a tightly-controlled dampened plate to a long tail that MusicRadar's Trevor Curwen found viable as a substitute for a dedicated spring simulation6. So the Guitar Edition covers plate sounds the Limited Spring Edition does not, while the Limited Spring Edition covers spring, gated and reverse sounds the Guitar Edition does not.

What reviewers said

Bass Gear Magazine published a video and written review of the pedal by Dan Veall in March 20242. His verdict on the audio quality was direct:

"24bit processing at 48kHz offers supremely high-resolution audio for pristine and realistic spatial effects"
Dan Veall, Bass Gear Magazine2

He also highlighted the "Other" position on the Type switch as holding the special effects, describing the gated reverb as aimed at those '80s synth-pop drum sounds, the reverse reverb as gentle, and the spring reverb as articulate2.

Videos

EBS DynaVerb - Spring Reverb Sound
Gregor Fris
EBS 🔥 DYNAVERB SE LIMITED SPRING EDITION
Bruno Tauzin - Votre Prof de Basse
EBS DynaVerb - Reverse Reverb
Gregor Fris

Questions

Can you use the EBS DynaVerb on guitar?

Yes. EBS says the DynaVerb is created for bass but can enhance any instrument from guitar to keyboard and even vocals with its studio-quality full-range sound. Bass Gear Magazine also noted the pedals have been enjoying success beyond the bass world. EBS also makes a separate DynaVerb Guitar Edition with hall, plate and room reverbs.

Does the DynaVerb Limited Spring Edition take a battery?

It has a battery installation option, but EBS strongly recommends using an external power supply for optimal performance. The pedal requires 9-18V DC power, so most players will want a regulated supply rather than relying on a battery.

Does the EBS DynaVerb have a parallel mode?

Yes. The pedal has an internal switch that allows it to be set to parallel mode if desired. That lets you keep your dry signal separate from the reverb rather than running the effect in series, which many bass players prefer for keeping the low end solid.

How much current does the EBS DynaVerb draw?

The DynaVerb Limited Spring Edition draws 80 mA max, on 9-18V DC regulated power. That is modest by digital reverb standards, so it will run comfortably on most isolated pedalboard power supplies.

Sources (6)
  1. EBS UniChorus & DynaVerb in review, EBS Professional Bass Equipment (ebssweden.com), 2024-03-08
  2. Bassic Review, BassGearMag, 2024-03-08
  3. EBS DynaVerb Limited Spring Edition and relaunch of the UniChorus, EBS Professional Bass Equipment, 2023-06-05
  4. EBS DynaVerb, EBS Sweden (ebssweden.com)
  5. EBS DynaVerb & UniChorus Spring Edition Launch, Premier Guitar, 2023-06-15
  6. EBS Dynaverb Guitar Edition review, MusicRadar, 2015-09-30

Other reverb pedals

All reverb pedals