tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Speaker simulation

Flamma Cab FS07
Photo: Flamma
Flamma

Flamma Cab FS07

Speaker simulation
List price
$88
Key facts
TypeStereo cabinet simulation pedal1
MakerFlamma1
Cabinet modes11, via a Type rotary knob1
Presets7 user slots, each storing two cabinet simulation settings2
Inputs/outputsMono or stereo in and out1

The Flamma FS07, sold as the Cab FS07, is a stereo cabinet simulation pedal from Flamma. It takes the place of a guitar speaker cabinet in a rig: it shapes the raw output of a preamp, amp modeler, or pedal platform so the signal sounds like it is coming through a real speaker when it reaches a mixer, audio interface, or soundboard. It was Flamma's first cabinet simulation pedal when it was introduced in February 20221.

What it does

The FS07 sits at the end of a signal chain, after a preamp or drive section, and applies speaker cabinet simulation. Delicious Audio described it as "their first Cab Simulation pedal" from Flamma1. It runs in mono or stereo: with a stereo input, up to two simulations can be selected simultaneously by assigning each to the Left or Right output, which lets a player send two different cabinet characters to separate destinations1.

Its outputs are aimed at the places a recorded or direct signal goes. The pedal supports either mono or stereo inputs and outputs to split the signal between external speakers, soundboards, mixers, or audio interfaces1. For players comparing this category, it sits alongside other dedicated cab sim and IR pedals such as the Two Notes Torpedo C.A.B., the Strymon Iridium, and the MOOER Radar.

The controls and presets

The front panel is simple. A single Type rotary knob selects among the 11 cabinet modes1, and a dual-function footswitch works either as a traditional power toggle or as a way to cycle through the preset slots1.

  • Type knob: selects among the 11 cabinet modes1
  • Footswitch: dual function, usable as a traditional power toggle or to cycle through the seven customizable preset slots1

Preset storage is deeper than the single knob suggests. The pedal includes 7 user preset slots that can store two different cabinet simulation settings each2, and those stereo or mono settings can be stored in seven presets browsable through the on/off footswitch1. Flamma also includes specialized editor software for quick management of presets2.

Impulse responses and software

Beyond the built-in modes, the FS07 loads third-party impulse responses (IRs, which are captured profiles of real speaker cabinets) through the included free software, allowing for a potentially much wider palette of cabinet sounds1. The same software handles preset management2.

"Through the included free software, the pedal can also load third-party impulse responses."
Delicious Audio, Paolo De Gregorio1

Price

Flamma lists the FS07 at a regular price of $88.00 USD, with a sale price of $188.00 USD shown on the product page as of 26 October 20262. When the pedal launched, Delicious Audio highlighted "the under $100 price point" as part of its appeal1.

The product page shows both a regular price of $88.00 USD and a sale price of $188.00 USD2. The regular price is the list price; the sale figure appears to be a separate listing on the maker's page.

Videos

FLAMMA FS07 Stereo Cabinets Simulation Pedal Official Demo#2
Flamma Innovation
Flamma: CAB FS07 - Stereo Cabinets Simulator
Brett Kingman
Flamma Cab FS07 Review | Funtwo
funtwo

Questions

Can the Flamma Cab FS07 load third-party impulse responses?

Yes. Through the included free software, the pedal can load third-party impulse responses, which opens up a much wider range of cabinet sounds beyond the 11 built-in cabinet modes. The same editor software is used for quick management of the pedal's presets.

How many cabinet modes does the Flamma Cab FS07 have?

The FS07 offers 11 cabinet modes, selected with a Type rotary knob. In stereo use, up to two simulations can run at the same time, with each assigned to the Left or Right output.

Is the Flamma Cab FS07 stereo?

Yes. The FS07 supports either mono or stereo inputs and outputs, so it can split the signal between external speakers, soundboards, mixers, or audio interfaces. In stereo, two different cabinet simulations can be assigned to the Left and Right outputs.

How many presets does the Cab FS07 hold?

The FS07 includes 7 user preset slots, and each slot can store two different cabinet simulation settings. The seven presets are browsable through the on/off footswitch.

How much does the Flamma Cab FS07 cost?

Flamma lists the FS07 at a regular price of $88.00 USD as of October 2026. When the pedal was introduced in February 2022, Delicious Audio noted its under $100 price point.

Sources (2)
  1. Flamma Cab FS07 Stereo Cabinet Simulator With IR, Delicious Audio, 2022-02-04
  2. FLAMMA FS07 Stereo Cabinets Simulation Pedal, Flamma Innovation (www.flamma.shop)

Other speaker simulation pedals

All speaker simulation pedals