The MXR Script Phase 90 is an analog phaser pedal built by the MXR Custom Shop. It is a reissue of the original vintage "script" Phase 90, the version MXR sold from the company's inception to the late '70s, and MXR says it "brings back the headroom and clarity of the original, along with its ultra warm and smooth phasing and reduced midrange swell"12. Unlike a stock vintage unit, it adds an LED and an AC power jack, which MXR describes as "modern convenience"1.
What it does
A phaser splits your signal and shifts the phase of one copy through a chain of stages, then recombines the two, producing the moving, sweeping notches that give phasers their characteristic sound. The Script Phase 90 does this with an all-analog circuit2 voiced after the earliest Phase 90, which RockBoard's PedalPedia notes "practically defined the classic phase shift"2.
The original script version's character comes from its circuit: General Guitar Gadgets, which documents the script-logo Phase 90 design, points to its LM741 op-amps as the source of the script version's "smooth, vocal sweep"4. MXR's own description of the reissue emphasizes headroom, clarity, warmth, and a reduced midrange swell compared with later Phase 90 circuits1.
How it is controlled and powered
The pedal keeps the original's single-knob format:
| Control | What it does |
|---|---|
| SPEED knob | Controls the rate of the phase effect3 |
| Footswitch | Toggles the effect on and bypass3 |
| Red LED | Indicates when the effect is on3 |
The manual's sample settings suggest positions for two classic uses, a "Classic 80's Rock" setting and a "Pseudo Leslie" setting3. Power comes from a 9V DC center-negative supply drawing 5mA, or from an internal 9-volt battery32. Bypass is true hardwire, so the effect is fully out of the signal path when switched off3.
How it differs from other Phase 90 versions
The Phase 90 has been made in several versions over the years, and the Script Phase 90 sits at the vintage end of that range:
- The original script-logo Phase 90, sold from MXR's inception to the late '70s, is the circuit this pedal recreates2.
- Later block-logo Phase 90s changed the circuit; MXR's description of the Script reissue, with its "reduced midrange swell," points to the difference players hear between the two voicings2.
- The MXR Phase 90 is the standard modern version, and the MXR EVH Phase 90 adds a Script switch so you can move between vintage and modern voicings on one pedal.
- The MXR Phase 45 is a related two-stage design; DIY builders of the script circuit commonly ask about adding a Phase 45 mod to the layout5.
The Script Phase 90 LED keeps the original's smooth orange paint and script logo, with the LED and AC power jack as the visible additions over a 1970s unit2.
Where it came from
The Phase 90 dates to MXR's founding era, with the script-logo version available from the company's inception to the late '70s2. This reissue comes from the MXR Custom Shop, dressed in the original finish and script logo2. The manual covers the CSP101SL Script Phase 90, and the LED and power jack are the changes that separate it from the vintage original13.
Videos
ProGuitarShopDemos
Sweetwater
gearmanndude
Sources (5)
- MXR® SCRIPT PHASE 90, Dunlop (jimdunlop.com)
- CSP101CL Script Phase 90 LED by MXR, RockBoard PedalPedia, 2026
- CSP101SL.pdf, Jim Dunlop, 2019
- MXR™ Phase 90™ Clone Kit: Script Logo Phaser, Matched JFETs, General Guitar Gadgets, 2014-05-18
- Guitar FX Layouts: MXR Phase 90 with Script Switch, tagboardeffects.blogspot.com (Guitar FX Layouts), 2023-11-22









