The Aguilar Chorusaurus is an all-analog bucket-brigade chorus pedal built specifically for bass, made by Aguilar. It uses analog bucket-brigade technology, the classic delay-line approach to chorus, to deliver what the maker describes as "a wide range of lush, organic chorusing sounds; from subtle swirling textures, to extreme chorusing"1. Because the effect sits alongside a blend of your clean signal, the low end of the instrument stays present rather than thinning out the way a full-wet chorus can do on bass.
Vintage Guitar magazine covered the pedal at its introduction, describing it as a bass chorus pedal in a steel housing with a four-knob layout2. A second generation, the Chorusaurus V2, later arrived with new graphics and a lighter enclosure while keeping the analog circuitry3.
What the Chorusaurus does
Chorus works by splitting the signal and delaying one copy slightly, then modulating that delay to create a thickened, moving sound. The Chorusaurus does this with analog bucket-brigade technology rather than digital processing, which Aguilar says gives the effect its organic character1. The maker positions it as covering everything from subtle texture at one end of its range to extreme chorusing at the other, and says it provides "the warm, rich tone that Aguilar gear is famous for"4.
For a bass player, the practical point is the clean blend. A chorus effect on its own can make bass notes lose definition, because the modulated copy smears the fundamental. The Chorusaurus has a Blend control that allows you to dial in the amount of clean and chorus, with a Mix knob that varies the ratio of dry and wet signals, so you can add the swirl without giving up the low end42.
The controls
The original Chorusaurus has a four-knob layout, which Vintage Guitar described at introduction as "a four-knob layout with Mix (to vary the ratio of dry and wet signals), Rate, Depth, and Width"2. The V2 keeps four knobs under slightly different names, listed by Guitar World as Blend, Rate, Intensity, and Width3.
| Knob (V1) | Knob (V2) | What it does |
|---|---|---|
| Mix | Blend | Varies the ratio of dry and wet signals23 |
| Rate | Rate | Sets the speed of the chorus modulation23 |
| Depth | Intensity | Sets how deep or pronounced the modulation is23 |
| Width | Width | Sets the width of the chorusing effect23 |
Aguilar's own page describes the ratio control in the same terms: it "controls the ratio of dry and wet signals"1. The blend control is the one most bass players will live on, since it decides how much of the clean fundamental stays under the effect.
Power and connections
The pedal takes one 1/4 inch input and has one 1/4 inch output jack that serves mono or stereo operation1. For mono, run a standard 1/4 inch cable to your amplifier. For stereo into two amplifiers, use a 1/4 inch Y cable with one TRS plug at the pedal splitting to two TS jacks at the amps1. Guitar World's guide makes the same point, noting that "It's not obvious, but stereo output is possible if you use a Y-Cable"3.
Aguilar specifies the pedal is powered by a universal 9-volt power supply only, and the supply is not included15. Guitar World's buying guide, however, lists battery operation as yes for the V23. Plan on having a 9V supply; the V2 is listed at 12mA at 9 to 10VDC3.
The V2 and what reviewers said
Guitar World's best bass effects pedals guide (January 2025) reviewed the Chorusaurus V2, calling it "a seriously good bit of kit" and crediting it with "lush premium tone"3. The guide notes the V2 "features an all-new graphic design and lighter enclosure but retains the warmth and thickening qualities that made the original one of our favorites"3. On the price side, the same review points out there are "cheaper solutions out there"3, which is worth weighing if the analog bucket-brigade character is not a priority.
"+ Lush premium tone"
Aguilar covers its products, the Chorusaurus included, with a three year limited warranty to the original owner against defects in materials and workmanship4.
Videos
Aguilar Amplification
Marcin Pendowski - Pendofsky
BassTheWorld.com
Questions
Does the Aguilar Chorusaurus have a blend control?
Yes. The pedal's mix control varies the ratio of dry and wet signals, so you can dial in the amount of clean bass alongside the chorus effect. Aguilar describes it as letting you set the perfect amount of clean and chorus, which keeps your low end solid under the effect.
How do you run the Chorusaurus in stereo?
The pedal has a single 1/4 inch output jack that carries mono or stereo. For stereo operation into two amplifiers, use a 1/4 inch Y cable with one TRS plug on the pedal end splitting to two TS jacks at the amps. Guitar World's guide notes that stereo output is possible this way, though it is not obvious from the pedal itself.
Does the Aguilar Chorusaurus take a battery?
Aguilar's product page specifies the pedal is powered by a universal 9-volt power supply only, which is not included. Guitar World's buying guide, by contrast, lists battery operation as yes for the V2, so the two publications give different answers on this point.
Is the Aguilar Chorusaurus analog?
Yes. Aguilar describes it as an all-analog bucket-brigade bass chorus pedal, using bucket-brigade technology for what the maker calls lush, organic chorusing. Guitar World's buying guide also lists the V2 as analog.
What power supply does the Chorusaurus need?
A universal 9-volt power supply, which is not included with the pedal. Guitar World lists the V2's power requirements as 12mA at 9 to 10VDC. Match your supply's polarity and current rating to those figures before plugging in.
Sources (5)
- Chorusaurus Bass Chorus Pedal, Aguilar Amplification
- Aguilar Offers Chorusaurus bass chorus, Vintage Guitar magazine, 2014-10-30
- Best bass effects pedals: best pedals for every style, Guitar World, 2021-12-20
- Chorusaurus Bass Chorus Pedal, Aguilar Shop (aguilaramp.com)
- Chorusaurus Bass Chorus Pedal, Aguilar (aguilaramp.com)









