tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Bass › EBS

EBS DynaVerb Studio Edition

EBS DynaVerb Studio Edition

BassDigital
Key facts
TypeDigital stereo reverb pedal1
MakerEBS1
CircuitDigital, 24-bit signal processing1
BypassRelayed true bypass1
Power9V DC, center negative, 80mA1
InstrumentsBass and guitar1

The EBS DynaVerb Studio Edition is a digital stereo reverb pedal from EBS, tailored specifically for bass and guitar instruments. It uses 24-bit signal processing to build its reverb sounds, and its relayed true bypass switching is designed to leave your original tone untouched when the effect is off1.

For a bass player, it is one of the few reverb pedals voiced with the instrument's low range in mind from the start, rather than a guitar pedal borrowed for the job. It sits alongside EBS's other Studio Edition pedals in the maker's bass-focused line1.

What it does: Room, Plate and Hall reverb

The DynaVerb Studio Edition offers three primary reverb types: Room, Plate, and Hall. Together they cover spaces ranging from subtle ambiences to vast reverberant decays1.

Reverb typeWhat it gives you
RoomSmall, subtle ambience
PlateClassic studio plate character
HallVast reverberant decays

A front-panel Reverb level control mixes the wet signal into your path, so you can set how much reverb sits behind your dry bass tone1. Room settings work for adding a touch of space around a dry amp sound, while Hall settings push toward big, sustained decays for ambient passages.

Because it is a stereo pedal, the reverb can spread across two outputs, and because it is digital, the wet signal is generated by the 24-bit processing rather than an analog circuit. The dry path is protected by the relayed true bypass, which RockBoard's PedalPedia says preserves the original instrument tone without degradation when the effect is bypassed1.

"Relayed true bypass switching preserves the original instrument tone without degradation when the effect is bypassed."
EBS product page1

Power and setup

The pedal runs on 9V DC with a center negative plug, drawing 80mA1. At that current draw it is modest for a digital pedal, but it still wants a proper isolated or clean supply rather than sharing power with noisy digital neighbors.

The 9V DC center negative requirement means the DynaVerb needs a standard pedalboard power supply; plan your power budget around its 80mA draw1.

For more on where a reverb pedal fits in a bass rig, see bass pedals and reverb pedals.

Videos

EBS DynaVerb Studio Edition - demo by Pascal Mulot
EBSSweden
MusicMaker Presents - EBS DYNAVERB - Studio Grade, High Quality Dynamic Reverb For BASS or KEYBOARD!
Musicmaker

Questions

Is the EBS DynaVerb Studio Edition true bypass?

Yes. EBS fits the DynaVerb Studio Edition with relayed true bypass switching, which the maker says preserves the original instrument tone without degradation when the effect is bypassed. Your dry signal path stays untouched when the pedal is off.

Is the EBS DynaVerb stereo?

Yes. The DynaVerb Studio Edition is a digital stereo reverb pedal, so it can run a stereo signal chain with a wet effect on both outputs, useful for wide reverb spreads in the studio or through two amps.

Does the DynaVerb work on bass?

Yes. EBS designed the DynaVerb Studio Edition specifically for bass and guitar instruments, so the reverb voicing is tailored with the low range of a bass in mind rather than being a guitar-only pedal adapted after the fact.

Is the EBS DynaVerb analog or digital?

It is digital. The DynaVerb Studio Edition uses 24-bit signal processing circuitry to generate its reverb algorithms, paired with relayed true bypass switching so the bypassed signal stays analog and unprocessed.

Sources (1)
  1. DynaVerb Studio Edition by EBS, RockBoard (PedalPedia), 2026

Other bass pedals

All bass pedals