The Electro-Harmonix Graphic Fuzz is a fuzz and distortion pedal with a 6-band graphic EQ built in, released by Electro-Harmonix in 2008 and discontinued in 20231. Electro-Harmonix describes it as "a unique distortion tool with 6-band EQ that is sensitive to the dynamics of your playing"1. The fuzz/distortion section is independent of the EQ and can be turned on or off, which means the pedal also works as a stand-alone six-band equalizer1.
Because it is discontinued, the Graphic Fuzz is now a second-hand purchase rather than a new one. It sits in a die-cast chassis that Electro-Harmonix calls "tough and compact"1.
The controls
The Graphic Fuzz is laid out with slide pots rather than the knobs of a typical fuzz pedal. Six of them shape the equalization, and the rest drive the fuzz and sustain circuitry1.
| Control | What it does |
|---|---|
| GRAPHIC EQ SLIDERS | Control the equalization across six bands1 |
| VOLUME SLIDER | Controls the output volume level1 |
| OVERDRIVE SLIDER | Controls the amount of overdrive1 |
| SUSTAIN SLIDER | Controls how long a note is sustained; only effective when the DYNAMICS slider is up1 |
| ON-FUZZ-OFF SWITCH | In the ON position the fuzz effect is on; in the OFF position the fuzz is off and the unit works as a graphic equalizer using the six slide pots1 |
The ON-FUZZ-OFF switch is the pedal's most distinctive feature. JHS Pedals, writing about underrated Electro-Harmonix pedals, noted that "you can turn the fuzz off" and use the EQ on its own2. That makes the Graphic Fuzz two pedals in one box: a dynamic fuzz/distortion with sustain, and a six-band graphic EQ that can stay in your signal chain when the fuzz is off.
The sustain behavior is worth understanding before buying one used. The SUSTAIN slider only has an effect when the DYNAMICS slider is up, so the two work together: dynamics sensitivity is what lets the pedal respond to how hard you play, and sustain then holds the note1.
Power and connections
The Graphic Fuzz runs on a 9.6VDC-200mA power adapter, which Electro-Harmonix included with the unit, and draws 100mA1. That draw is high for a compact analog pedal, so a pedalboard supply needs a 100mA-or-better output to feed it.
The Graphic Fuzz draws 100mA, which rules out small battery-style supplies, and it runs in a tough and compact die-cast chassis measuring 5.75 x 4.75 x 2.5 inches. Check any used unit for a supply that can deliver its current requirement.1
Connection is simple: a ¼" audio input jack on one side and a ¼" audio output jack on the other1. With true bypass, the pedal drops out of the signal path entirely when switched off1.
Videos
EHX
GuitarFXMania
docSanchezFX
Questions
Is the Electro-Harmonix Graphic Fuzz true bypass?
Yes. Electro-Harmonix lists the Graphic Fuzz as true bypass, so with the fuzz switched off the pedal's circuitry is taken out of the signal path. Note that the ON-FUZZ-OFF switch only turns the fuzz section on and off; the EQ sliders remain part of the signal path when the unit is used as a stand-alone equalizer.
Is the Graphic Fuzz discontinued?
Yes. Electro-Harmonix discontinued the Graphic Fuzz in 2023, fifteen years after its 2008 release. It is no longer in the maker's current lineup, so it is now found second-hand rather than new from retailers.
What power supply does the EHX Graphic Fuzz need?
The pedal runs on a 9.6VDC-200mA power adapter, which Electro-Harmonix included with the unit, and draws 100mA. That current draw is well above what a typical battery-powered pedal supply delivers, so it needs a mains adapter or a suitably rated pedalboard power supply.
Sources (2)
- Graphic Fuzz, Electro-Harmonix, 2023
- UNDERRATED ELECTRO-HARMONIX PEDALS, JHS Pedals









