The Behringer BOD400 is an analog bass overdrive pedal, which Behringer markets as an "Authentic Tube-Sound Overdrive Effects Pedal"1. Its defining feature is a clean blend: the BALANCE control lets you mix the overdriven signal with your natural bass sound, which Behringer says delivers "superb clarity, punch" alongside the distortion1. That kind of blend is a common want on bass overdrive, where losing all low end under fuzz or grit can thin out a mix.
Behringer describes the sound as "rich, tube-like distortion, smooth sustain and super-fat tone"1. The pedal is built for the full range of the instrument: "Here's an overdrive pedal that supports the entire frequency range of bass guitars, even 5 & 6-stringers," according to Behringer's product page1. For players browsing bass pedals or overdrive pedals generally, it sits in the compact, single-effect corner of Behringer's range rather than the modeling side, alongside units like the V-TONE BASS DRIVER DI BDI21 and the Bass Overdrive.
The controls
The BOD400 keeps its panel simple. Behringer says it "features a very musical 2-band EQ and dedicated Gain and Level controls"1, with the BALANCE knob handling the clean blend described above.
| Control | What it does |
|---|---|
| Gain | Sets the amount of overdrive1 |
| Level | Sets the pedal's output volume1 |
| BALANCE | Mixes the overdriven signal with your natural bass sound1 |
| EQ | 2-band EQ for tone shaping1 |
The BALANCE control is the one to understand first. Because it blends rather than switches, you can run a little grit under your clean tone for punch, or push it toward full overdrive when a part calls for it. Behringer frames the result as clarity and punch from keeping the natural bass sound in the mix1.
Power and practical notes
The pedal runs on 9V DC, center negative, and draws 100mA according to RockBoard's PedalPedia listing2. That draw is worth a glance at your power supply's per-output budget: a 100mA pedal may not be happy sharing an output sized for low-draw analog pedals on a daisy chain or a modest isolated supply.
RockBoard's PedalPedia entry links the official manual, which covers English, German, French, Dutch, Polish, Spanish, Italian, Japanese and Portuguese2.
Videos
Behringer
Patrick Hunter
the wetter bass
Questions
Is the Behringer BOD400 analog or digital?
The BOD400 is an analog pedal. RockBoard's PedalPedia lists its circuit type as analog, so it processes your bass signal with analog circuitry rather than digital modeling. That matters for players who want a straightforward overdrive stage on a pedalboard without menu diving or digital conversion in the signal path.
What power supply does the Behringer BOD400 need?
The BOD400 runs on 9V DC, center negative, and draws 100mA according to RockBoard's PedalPedia listing. Because of that current draw, it is worth checking what your power supply's outputs can deliver before sharing a daisy chain with other pedals.
Does the Behringer BOD400 work with 5-string and 6-string basses?
Yes. Behringer's product page says the pedal supports the entire frequency range of bass guitars, including 5 and 6-string basses, so the low B and C strings are covered by the pedal's design.
What does the Balance knob do on the BOD400?
The BALANCE control mixes the overdriven signal with your natural bass sound. Behringer describes this as delivering clarity and punch, since you keep some of your clean tone underneath the distortion instead of replacing it entirely.
Can I use the BOD400 with a guitar?
The BOD400 is designed as a bass overdrive, built to support the full frequency range of bass guitars. Behringer markets it as a bass pedal, and the page's published material describes it for bass use rather than guitar use.
Sources (2)
- BOD400 | Behringer, Behringer
- BOD400 by Behringer, RockBoard PedalPedia, 2026
