The MXR Vintage Bass Octave, model number M280, is an analog octave pedal for bass built into MXR's mini housing. It generates two octave-down voices from your playing, one octave below your note and two octaves below it, and each voice has its own volume control so you can blend them with your dry signal. MXR describes it as upgrading "the warm analog sub-bass vibes of a classic circuit" with superior tracking and cleaner headroom, and says it delivers sounds ranging from a tone-thickening growl to chest-rumbling dub tones12.
It carries a list price of $169.993.
What it does and how it is controlled
The pedal produces two octave voices, one octave down and two octaves down, each dialed in separately with the Oct 1 and Oct 2 volume controls1. A Dry control sets the level of your original signal, with a gain range up to 7 dB2. The maker says the range of sounds runs from a tone-thickening growl to chest-rumbling dub tones2.
| Control | What it does |
|---|---|
| OCT 1 | Volume of the one-octave-down signal2 |
| OCT 2 | Volume of the two-octaves-down signal1 |
| Dry | Level of your original signal, up to 7 dB of gain2 |
| Mid switch | +6 dB boost at 800 Hz5 |
The Mid switch is the feature that separates the M280 from a plain octave-down box. Guitar World's reviewer called the 6 dB boost at 800 Hz "a godsend," finding it useful for adding a mid point and growl to punch through, especially with Oct 2 engaged5. If you want more than the switch's stock boost, an internal trimpot raises the midrange boost as high as +13 dB; you reach it by removing the bottom plate1.
The Mid switch's stock boost is +6 dB at 800 Hz, but the manual lists the switch frequency as either 400 Hz or 800 Hz at 6 dB, so the two positions give you a choice of midrange focus2.
Tracking: how low it holds
Tracking is where analog octave pedals usually show their limits, and the published reviews of the M280 were positive. Premier Guitar's reviewer found that with the Oct 1 control dimed, notes held all the way down to the 4th string's 1st fret before glitching4:
"With the Oct 1 control dimed, my notes were holding all the way down to the 4th string's 1st fret before glitching"4
Guitar World's reviewer found the tracking of the original bass signal impressive with both active and passive basses, producing fewer ghost effects and resonances5. The manual gives a trigger threshold of -74 dBv at 100 Hz, which is the signal level the octave circuit needs to lock onto your note2.
Power and connections
The M280 runs on 9 VDC at 45 mA2. It is powered by the Dunlop ECB003 9-volt adapter or an MXR Brick Series power supply such as the DC Brick, Iso-Brick or Mini Iso-Brick, each sold separately12.
This pedal cannot be powered by a battery2. If you are building a board around it, plan on a power supply, and note the 45 mA draw when choosing an isolated output.
Setup is straightforward: run a cable from your bass to the M280's INPUT jack, then another cable from the OUTPUT jack to your amplifier2. Input impedance is 1M ohm and output impedance is under 1K ohm2.
Specifications
| Specification | Value |
|---|---|
| Power requirements | 9 VDC @ 45 mA2 |
| Input impedance | 1M ohm2 |
| Output impedance | <1K ohm2 |
| Signal to noise | -93 dBV, A weighted2 |
| Bypass | THW BP2 |
| Octave 1 gain | up to 1.6 dB at 150 Hz in2 |
| Octave 2 gain | up to 1.7 dB at 150 Hz in2 |
| Dry gain | up to 7 dB2 |
| Mid switch | 400 Hz or 800 Hz at 6 dB2 |
| Trigger threshold | -74 dBv at 100 Hz2 |
How it differs from other MXR bass octaves
MXR makes more than one route to sub-bass. The M280 is the mini-format analog option with its blendable Oct 1, Oct 2 and Dry controls plus the Mid switch. The MXR Bass Octave Deluxe is the company's other octave pedal for bass, built in the larger MXR housing rather than the mini enclosure15. MXR also offers the Sub Octave Bass Fuzz, which combines a sub octave with fuzz in one box3. For players comparing the whole bass line, MXR's range covers envelope filters, compressors, overdrive and distortion alongside the octave pedals.
Who plays it
Jim Dunlop's artist page for Snarky Puppy lists the MXR Vintage Bass Octave as a particular favorite of the band6.
Videos
Janek Gwizdala
The Bass Channel
GAK
Questions
Can the MXR Vintage Bass Octave run on a battery?
No. The manual states plainly that the pedal cannot be powered by a battery. It runs on a 9 VDC supply drawing 45 mA, specifically the Dunlop ECB003 9-volt adapter or an MXR Brick Series power supply, each sold separately, so you need a power supply on your board.
How low does the MXR M280 track before glitching?
Premier Guitar's reviewer found that with the Oct 1 control dimed, notes held all the way down to the 4th string's 1st fret before glitching. Guitar World's reviewer called the tracking of the original bass signal impressive with both active and passive basses, producing fewer ghost effects and resonances.
What is the difference between the M280 and the MXR Bass Octave Deluxe?
The M280 Vintage Bass Octave is a mini-format analog octave pedal with Oct 1, Oct 2 and Dry volume controls plus a Mid switch giving a +6 dB boost at 800 Hz, adjustable internally up to +13 dB. The Bass Octave Deluxe is MXR's other octave pedal for bass, built in the larger MXR housing.
Does Snarky Puppy use the MXR Vintage Bass Octave?
Yes. Jim Dunlop's artist page for Snarky Puppy lists the MXR Vintage Bass Octave as a particular favorite of the band.
Is the MXR Vintage Bass Octave analog?
Yes. MXR describes it as upgrading the warm analog sub-bass vibes of a classic circuit with superior tracking and cleaner headroom, and the manual confirms the analog design.
Sources (6)
- MXR® VINTAGE BASS OCTAVE, Dunlop (jimdunlop.com)
- M280.pdf, Jim Dunlop (jimdunlop.com), 2022
- MXR® SUB OCTAVE BASS FUZZ, Dunlop (jimdunlop.com)
- Quick Hit: MXR Vintage Bass Octave Review, Premier Guitar, 2019-03-08
- MXR Sub Octave Bass Fuzz, Vintage Bass Octave and Dyna Comp Bass review, Guitar World, 2021-08-26
- Artists - Snarky Puppy - Dunlop, Jim Dunlop (www.jimdunlop.com)









