The Xvive W2 Overdrive Fuzz is an analog effects pedal from Xvive that puts overdrive and fuzz in one box, with a control that blends between the two. RockBoard's PedalPedia describes it as a tube-style drive that goes from subtle dirt to a screaming, highly compressed edge-of-breakup tube amp sound1.
What it does
The W2's core idea is that overdrive and fuzz are not separate modes but two ends of one control. The DISTORTION knob selects all overdrive at one end of its range, all fuzz at the other, and a blend of both in between, so you can mix the two effects as desired rather than switching between them2.
RockBoard's PedalPedia says the pedal also features impressively enhanced picking dynamics that you don't usually hear in normally compressed fuzz and drive boxes1. That claim is backed up by the DYNAMICS control, which is unusual for this kind of pedal.
"The Fuzz Overdrive from Xvive delivers a tube-style drive that goes from subtle dirt to a screaming, highly compressed edge of breakup tube amp sound."
Controls
| Control | What it does |
|---|---|
| DRIVE | Sets the gain for the signal driving the distortion circuitry. Set low, the output is low in volume and distortion; as drive is increased, distortion level and sustain increase2 |
| DISTORTION | Selects all overdrive on one end of the control, all fuzz on the other, and a blend between these extreme settings2 |
| DYNAMICS | Restores input signal level changes in the output. All the way down, the output is highly compressed and sustain is very long; fully turned up, dynamics are actually exaggerated and sustain is shortened2 |
The DYNAMICS control is the distinctive one. Most fuzz and drive circuits compress your playing to some degree; the W2 lets you dial that compression back, or push it further into exaggerated dynamics with shorter sustain, depending on how responsive you want the pedal to feel2.
Power
The W2 runs on 18V DC with a center negative plug and draws 100mA1.
The W2 runs on 18V DC, center negative, which is higher than the supply most pedals use, so it needs a power supply or isolated output rated for 18V. It cannot run on a standard daisy chain.
Videos
Mike Hermans
Greg Kocis
T K
Questions
What does the Xvive W2 Overdrive Fuzz do?
It is an analog pedal that combines overdrive and fuzz in one circuit. A DISTORTION control selects all overdrive on one end, all fuzz on the other, and any blend between the two, so you can dial in anything from subtle dirt to a screaming, highly compressed fuzz sound.
What does the DYNAMICS control on the W2 do?
It restores or exaggerates how your picking dynamics come through. Turned all the way down the output is highly compressed with very long sustain; fully turned up your dynamics are actually exaggerated and sustain is shortened. Xvive says this is a response you don't usually hear in compressed fuzz and drive boxes.
How is the Xvive W2 powered?
It runs on 18V DC with a center negative plug, drawing 100mA. That voltage is higher than the 9V most pedals use, so it needs a power supply or an output that can deliver 18V.
Sources (2)
- W2 Overdrive Fuzz by Xvive, RockBoard (PedalPedia), 2026
- W2 说明书, Xvive, 2014
