tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Fuzz › Function f(x)

Function f(x) Clusterfuzz Micro

Fuzz
List price
$189
Key facts
TypeFuzz pedal1
MakerFunction f(x)1
ControlsVolume, Tone, Fuzz, and 8-Bit knobs1
ClippingThree options: no diode clipping, MosFET, and silicon diodes1
BypassTrue bypass mechanical switching1
Power9v DC operation (industry standard), 10mA current draw1
Input impedance~300K (works with buffers)1
Enclosure3.6″ x 1.5″ x 1.2″ (92.5 x 38.5 x 31 mm), standard 1590A-sized1
Weight7 oz (198 g)1
Status2026; waitlist 2

The Function f(x) Clusterfuzz Micro is a compact fuzz pedal, described by its maker as the smaller brother to the Clusterfuzz and Clusterfuzz Jr. pedals. Function f(x) says it is the same circuit under the hood as those pedals, with a few less features to allow it to fit into a standard 1590A-sized enclosure, and that it uses the same types and values of components as its bigger siblings, simply scaled down to a smaller footprint based on customer feedback1.

"the same circuit under the hood, with a few less features to allow it to fit into a standard 1590A-sized enclosure"
Function f(x), Clusterfuzz Micro product page1

Controls and clipping options

The Micro carries four knobs, each doing a single job:

ControlWhat it does
VolumeSets the pedal's output level1
ToneShapes the fuzz's treble content1
FuzzSets the amount of fuzz saturation1
8-BitThe feature carried over from the larger Clusterfuzz designs1

The 8-Bit control is the feature that sets this pedal apart on a board, and it carries over from the larger Clusterfuzz designs in the family1.

Function f(x) gives the pedal three clipping options for different saturation levels1:

Clipping optionCharacter
No diode clippingOpen, unclipped fuzz voice1
MosFETMosFET-flavored saturation1
Silicon diodesThe harder edge of silicon diode clipping1

All three live in one compact box, so the player chooses between them rather than between pedals1.

Size, power and board fit

The Micro is built into a standard 1590A-sized enclosure, measuring 3.6″ x 1.5″ x 1.2″ (92.5 x 38.5 x 31 mm) and weighing 7 oz (198 g)1. Switching is true bypass mechanical switching1.

As of September 25, 2026, the maker's product page lists the Clusterfuzz Micro at a list price of $189.00 USD2.

Where it sits in the Function f(x) range

The Micro is one of three Clusterfuzz designs from Function f(x), alongside the full-size Clusterfuzz and the Clusterfuzz Jr.. The maker's framing is consistent across its mini pedal pages: the same circuit under the hood, with a few less features to fit the smaller 1590A enclosure13.

PedalEnclosureFeatures
ClusterfuzzFull sizeFull feature set1
Clusterfuzz Jr.Smaller packageReduced feature set3
Clusterfuzz MicroStandard 1590A-sizedFewer features, same circuit1

The trade the maker describes is straightforward: fewer features in exchange for a footprint that suits tight pedalboards, with the component types and values unchanged from the bigger siblings1.

Questions

Is the Clusterfuzz Micro true bypass?

Yes. Function f(x) specifies true bypass mechanical switching on the Clusterfuzz Micro, so when the pedal is off, your guitar's signal passes straight through to the amplifier without going through the fuzz circuit. That matters on a crowded board, where a compact pedal like this is often left on all the time and you want the bypassed tone to stay untouched.

How much current does the Clusterfuzz Micro draw?

Function f(x) lists a 10mA current draw at 9v DC operation, which the maker describes as industry standard. That is a light load, so the Micro sits comfortably on a daisy-chained supply alongside other standard 9V pedals without needing its own dedicated output.

Does the Clusterfuzz Micro use the same circuit as the full-size Clusterfuzz?

Function f(x) says it is the same circuit under the hood, with a few less features to allow it to fit into a standard 1590A-sized enclosure. The maker also states it uses the same types and values of components as its bigger siblings, scaled down to a smaller footprint based on customer feedback.

What size is the Clusterfuzz Micro enclosure?

The Micro measures 3.6 inches by 1.5 inches by 1.2 inches, or 92.5 by 38.5 by 31 millimeters, in a standard 1590A-sized enclosure. It weighs 7 oz, or 198 g. That is the small footprint Function f(x) uses across its mini pedal line.

Sources (3)
  1. Clusterfuzz Micro, Function f(x), 2025-12-14
  2. Clusterfuzz Jr., Function f(x), 2026-09-25
  3. Mini Pedals, Function f(x), 2020-04-04

Other fuzz pedals

All fuzz pedals