The MXR Smart Gate is a noise gate pedal made by MXR, carrying the model number M1351. A noise gate mutes or reduces your signal when you stop playing, so hum, hiss and buzz from high-gain rigs go silent between notes. MXR describes the Smart Gate as a pedal that "bites down on sizzle and hum but lets the smallest detail of your playing through," with three selectable types of noise reduction, Hiss, Mid and Full, a precise threshold trigger and what the company calls amazingly clean circuitry1. Dunlop's own history of the MXR line calls the Smart Gate Noise Gate a modern classic alongside the Carbon Copy Analog Delay2.
It is a deliberately simple box, and Guitar World's reviewers found it incredibly easy to use and surprisingly powerful despite the lack of knobs3. They also found it well put together, with a solid chassis and footswitch that engages with a satisfying click3.
The controls: Hiss, Mid and Full modes
The front panel is built around three controls: a Trigger Level knob, a Mode switch and a Hi Trigger switch7. Guitar World summarizes the control set as Trigger level, Trigger range and Mode, and notes that the pedal is effectively a single control, with the main Trigger knob working as a threshold control3.
| Control | What it does |
|---|---|
| Trigger Level knob | Controls the sensitivity of the gate threshold; a yellow GATE LED indicates when the gate is engaged4 |
| Mode switch (NOISE BAND CUT) | Selects the noise reduction range: Hiss, Mid or Full4 |
| Hi Trigger Range switch | Extends the trigger range for extremely noisy situations4 |
| Footswitch | Toggles the effect on and bypass, with a red LED indicating on4 |
The three modes are the heart of the pedal. Each targets a distinct band of problem audio: Guitar World describes the first mode as treble, the second as mids, and the third as a full-range gate mode3. The manual is more specific about where each setting earns its keep:
- Hiss and Mid: both effective on instruments with high-gain midrange boosting, such as distorted electric guitars and amplified harmonicas4
- Full: most effective for quieting input sources with low-end hum and buzz problems, such as AC line noise, display noise or light dimmer noise4
GuitarPlayer's reviewers put the modes in playing terms: "Full mode offers a really dynamic, quick gate that snaps close and produces a tight sound that is ideal for chugging, while Hiss mode does an excellent job removing any trace of nasty noise in your sound, with Mid sitting somewhere in between"7. The same guide notes the three settings of full, mid and hiss will generally cover all uses7.
Setting the pedal up is a short process, straight from the manual:
- Run a cable from your guitar to the Smart Gate's INPUT jack4
- Rotate the TRIGGER LEVEL knob clockwise until unwanted noise has completely died out4
- Choose Hiss, Mid or Full on the Mode switch to match the kind of noise you are fighting4
The manual also notes the pedal reacts gradually to long, sustained notes, and Guitar World's 2015 review found the gate "will never get in your way" and lets sustain ring without being cut off, thanks to what the reviewer called its uncanny ability to sense precisely when, and how fast, to engage48.
Power: 9V, 15mA
The Smart Gate runs on 9 volts DC and draws 15 mA4. Power options are broad for a compact pedal: one 9-volt battery installed by removing the bottom plate, a Dunlop ECB003 9-volt adapter, or Dunlop's DC Brick, Iso-Brick and Mini Iso-Brick power supplies, none of the external supplies included41. At 15 mA it is a light load on an isolated power supply, well within what a typical multi-output brick supplies.
The Smart Gate Pro is not battery-powered. Its manual states plainly: "An AC adapter must be used to operate the Smart Gate Pro"9.
The Smart Gate Pro and rack versions
MXR has built the Smart Gate concept into more than one format. The MXR Smart Gate Pro is a noise reduction pedal from the MXR Custom Shop, powered by the Dunlop ECB-004 adapter, an 18-volt DC regulated AC adapter, rather than a 9-volt battery910. It is intended to sit in your amp's effects loop, with a cable from the amp's effect send jack into its input and another from its output jack to the amplifier's effect return jack9. That is the key practical difference from the M135, which has no send/return loop of its own6.
The Smart Gate Pro Rack Unit, model M235, is what Dunlop calls the big brother to the Smart Gate pedal10. It carries the same three selectable ranges, Hiss, Mid and Full, with a precise threshold trigger, but adds two discrete channels that can be linked to quiet a stereo signal, a Sync function that links channels A and B, selectable ground lift, and remote switching capabilities with status-indicating LEDs109. Each channel gets its own three-position knob for the type of noise reduction and its own Trigger Level knob for threshold adjustment9. The rack unit runs on 9 volts from the included Dunlop ECB003 adapter10, and it has true hardwire-bypass outputs on each channel910. A separate Smart Gate Pro Foot Controller handles the remote switching side, powered like the M135 by a 9-volt battery, an ECB003 adapter or the Brick supplies116.
| Version | Model | Power | Bypass | Loop |
|---|---|---|---|---|
| Smart Gate (pedal) | M135 | 9V DC, 15 mA, battery or adapter41 | Hardwire4 | No send/return loop3 |
| Smart Gate Pro (pedal) | 18-volt DC regulated AC adapter, Dunlop ECB-0049 | Designed for the amp's effects loop9 | ||
| Smart Gate Pro Rack Unit | M235 | 9V, included ECB003 adapter10 | True hardwire-bypass per channel9 | Two discrete channels, linkable9 |
MXR also makes the Noise Clamp, a separate noise reduction pedal in the same family, announced in 2011 with up to 26dB of reduction.
What reviewers said
Published reviewers have been consistent about the Smart Gate's strengths and limits. Guitar World's 2015 Recommends review praised its build and its sensing speed, and its 2026 buyer's guide calls it incredibly easy to use with 2-band filters for triggering and 3 modes for different use cases, while listing its lack of a send/return loop as a reason to avoid it83. GuitarPlayer's guide credits it with simple operation and super quick operation, calling it ideal for chuggers playing live who want great results fast, but flags that the switches won't be to everyone's taste, that it is optimized for heavy genres, and that it uses old technology7. In Guitar Pedal X's 2025 roundup of compact noise gates, the M135 sat at $149 against the RedSeven NGR-1 at $249, the Revv G8 at $169, the Stone Deaf Noise Reaper at $159 and the TC Electronic Sentry at $846.
For comparison shopping, the same guides point to alternatives covered elsewhere on this site, including the TC Electronic Sentry, named best overall in Guitar World's 2026 guide, the Boss NS-2 Noise Suppressor, named best pro option, the Revv G8 Noise Gate, the Stone Deaf Noise Reaper and the Redseven Amplification NGR-1.
Videos
Guitar World
tunnelvisionmusic
Isurus
Questions
Does the MXR Smart Gate have an effects loop?
No. The M135 Smart Gate is a simple in-line gate with an input and an output and no send/return loop, so it cannot gate only part of your chain the way a loop-based gate can. If you need a loop, the Smart Gate Pro is designed to sit in your amp's effects loop instead.
Can the MXR Smart Gate run on a battery?
Yes. The M135 runs on one 9-volt battery, installed by removing the bottom plate, or on a Dunlop ECB003 9-volt adapter, or on Dunlop's DC Brick, Iso-Brick and Mini Iso-Brick power supplies. The Smart Gate Pro is different: its manual states an AC adapter must be used to operate it.
What does the Hi Trigger switch do on the MXR Smart Gate?
The Hi Trigger Range switch extends the trigger range for extremely noisy situations. With it engaged, the Trigger Level knob can reach thresholds high enough to gate very loud noise floors, such as a high-gain rig with heavy hum, that the normal range cannot handle.
Is the MXR Smart Gate true bypass?
MXR describes the M135's bypass as hardwire bypass rather than true bypass. The Smart Gate Pro rack unit goes further, with true hardwire-bypass outputs on each of its two channels, so the bypass story differs between the pedal and the rack version.
What do the Hiss, Mid and Full settings do?
They select which band of noise the gate works on. Hiss and Mid suit high-gain midrange content like distorted guitars and amplified harmonicas, while Full is most effective on low-end hum and buzz such as AC line noise, display noise or light dimmer noise. Reviewers found Full tight and quick for chugging and Hiss strong at removing noise.
Sources (11)
- MXR® SMART GATE® NOISE GATE, Jim Dunlop (jimdunlop.com)
- MXR: A Short History, Dunlop (lifestyle.jimdunlop.com), 2014-03-05
- Best noise gate pedals 2026: clean up your signal, Guitar World, 2021-03-19
- M135.pdf, Dunlop Manufacturing, Inc., 2019
- MXR® TURBO TUNER, Jim Dunlop (jimdunlop.com)
- Guitar Pedal X, Guitar Pedal X, 2025-05-26
- Best noise gate pedals: control your tone, GuitarPlayer (www.guitarplayer.com), 2024-09-24
- Guitar World Recommends: MXR Smart Gate Noise Gate Pedal, Guitar World, 2015-07-17
- M235, Dunlop Manufacturing, Inc., 2019
- MXR® SMART GATE® PRO RACK UNIT, Jim Dunlop (jimdunlop.com)
- MXR® SMART GATE® PRO FOOT CONTROLLER, Dunlop (jimdunlop.com)










