The Mooer VE200 is a vocal multi-effects unit: a single box that sits between a microphone and the PA and carries the whole vocal chain, from tone shaping and pitch correction through modulation, delay and reverb. It also takes an instrument, so a singing guitarist can run voice and guitar through it together, and it runs on an internal rechargeable battery rather than a wall adapter1.
Effects modules
The VE200's signal chain is built from six modules, each covering one job a vocal player needs1:
| Module | What it covers |
|---|---|
| TE Tone Enhance | EQ, de-mud, presence, de-essing, air and saturation tools for shaping clarity and weight |
| PC Pitch Correction | Chromatic or scale-based correction, manual key or MIDI note data, adjustable strength and response |
| VO Vocal | Dedicated vocal processing |
| MD Modulation | Modulation effects |
| DL Delay | Delay with an adjustable time from 40 ms to 2500 ms |
| RV Reverb | Reverb effects |
The Tone Enhance module is where the raw mic signal gets cleaned up: MOOER describes tools for shaping clarity and weight with EQ, de-mud, presence, de-essing, air, and saturation1. Pitch correction can follow either a fixed key set manually or MIDI note data, with the correction strength and response adjustable to taste1.
Inputs, outputs and routing
The combo input accepts either an XLR microphone cable or a 6.35 mm plug, and it supplies 48 V phantom power for condenser microphones, so no separate preamp or power supply is needed for a studio-style mic1. A dedicated 6.35 mm instrument input handles guitar or another instrument alongside the mic1.
On the output side, the VE200 offers dual balanced XLR outputs with GND/LIFT switching, a switch that helps with ground loop hum when connecting to a PA or mixer. These pair with dual 6.35 mm outputs and a SPLIT mode for routing vocals and instruments to different destinations1.
Looper, battery and USB
The onboard looper records up to 60 seconds and is multi-layer, supporting layered vocal and instrument ideas, which suits a solo performer building a arrangement from scratch1. Power comes from a built-in 3.7 V / 3000 mAh rechargeable battery that MOOER rates at 5 hours, so the unit can be used away from mains power1. A 1.28" round color touchscreen gives live visual feedback while editing1.
The USB-C port carries OTG audio for streaming, recording, and sharing, so the VE200 can pass audio straight to a computer or mobile device without a separate audio interface1. MOOER also lists AI StemLab separation for fast custom backing tracks, which splits existing audio so a player can build tracks to sing over1.
Where it sits in Mooer's range
The VE200 is the vocal-focused entry in Mooer's multi-effects lineup, which is otherwise aimed at guitarists with units like the Mooer GE300, MOOER GE150 and Mooer GE100 Pro. Players looking at vocal processing more broadly can also see the vocal pedals and multi-effects pedals categories for how units like this compare.
Videos
MOOER Audio
Jenudsstuff
dilliot2k
Questions
Is the Mooer VE200 for guitar or vocals?
It is a vocal multi-effects unit, but it is built to handle both. The XLR/6.35 mm combo input takes a microphone, and a dedicated 6.35 mm instrument input takes a guitar or other instrument. The onboard looper supports layered vocal and instrument ideas, so a player can sing and play through the same unit.
Does the Mooer VE200 have phantom power?
Yes. The XLR/6.35 mm combo input supports 48 V phantom power, so condenser microphones can be plugged straight in without a separate power supply or interface.
How long does the Mooer VE200 battery last?
The VE200 has a built-in 3.7 V / 3000 mAh rechargeable battery that MOOER rates at 5 hours of use. Because the battery is built in, the unit is not tied to a wall adapter for portable use.
How long can the Mooer VE200 looper record?
The onboard looper records up to 60 seconds and is multi-layer, so vocal and instrument parts can be stacked on top of each other.
How long a delay time does the Mooer VE200 offer?
The DL Delay module offers an adjustable delay time from 40 ms to 2500 ms.
Can the Mooer VE200 be used as a USB audio interface?
MOOER describes the VE200's USB-C connection as OTG USB-C audio for streaming, recording, and sharing, which covers sending audio to a computer or mobile device for recording and streaming.
Sources (1)
- VE200_MOOER Audio, MOOER Audio
