tonebx
☰
BrandsPlayersGuidesNewsAll pedal typesComparisons

Pedals › Bass › Tech 21

Tech 21 SansAmp Programmable Bass Driver DI

Tech 21 SansAmp Programmable Bass Driver DI

BassHybridDiscontinued
Key facts
Type3-channel programmable bass preamp/DI1
MakerTech 213
CircuitryAll-analog, digital only in its programmability1
PowerPhantom power, 9V alkaline battery (not included), or optional Tech 21 DC9 supply (former DC2 and DC4 models also work)1
EnclosureRoadworthy all-metal construction1
Dimensions7.25" L x 5.25" W x 2.25" H1
Weight25 oz1

The Tech 21 SansAmp Programmable Bass Driver DI is a three-channel, programmable bass preamp and DI built around Tech 21's all-analog SansAmp Tube Amplifier Emulation technology, which the maker says covers the entire signal chain from pre-amp to power amp to speaker simulation1. Where the standard Bass Driver DI gives you one tone at a time, the Programmable version stores three, so you can keep a clean verse tone, a driven chorus tone and a lead tone ready on footswitches. Tech 21's own framing is direct: "we had to make a 3-channel, programmable, rig-in-a-box for bassists who can't get enough of a great thing."1

Guitar World's reviewer described it as "The original, bombproof, do-it-all bass preamp, with an iconic and oft-imitated sound, in programmable multi-preset form."2 The circuitry is analog throughout; only the programmability is digital1.

A three-channel analog bass preamp

The Programmable Bass Driver DI follows the approach of Tech 21's TRI-A.C. for guitar: three saved tones, in the maker's words, "right at your toetips"1. Saving a tone is deliberately simple. You tweak the knobs until you find a sound, double-tap on a footswitch, and the tone is stored in that channel1. From there, the three footswitches select between your stored setups, which is the practical difference between this and a single-channel preamp: a gig where the song list jumps between clean, gritty and fully driven bass tones does not require kneeling down to re-dial knobs between numbers.

The signal path is the SansAmp Tube Amplifier Emulation, a 100% analog design that Tech 21 says encompasses the whole chain, from pre-amp to power amp to speaker simulation1. The built-in speaker/cab simulation is individually tailored for a smooth, even response, which Tech 21 compares to a multiply-miked cabinet, without the peaks, valleys and notches associated with single miking and many impulse responses1. For players who record or go straight to the desk, that speaker sim is what lets the XLR output sound like a miked rig rather than a raw line signal.

The controls and outputs

The all-analog circuitry carries the same controls as the single-channel Bass Driver DI predecessor: Drive, Bass, Treble, Presence, Blend and Level1. Tech 21's descriptions of what those controls do on the Bass Driver DI apply to the shared circuitry:

ControlWhat it does
DriveAdjusts the overall gain structure and overdrive3
BassLow-band EQ, part of the active EQ tuned for bass4
TrebleHigh-band EQ, part of the active EQ tuned for bass4
PresenceControls the amount of definition and upper harmonic content3
BlendCombines the ratio of direct signal and SansAmp circuitry5
LevelRegulates the XLR and effected 1/4" output levels3

The active EQ on the Bass Driver DI circuit is specifically tuned for bass with 12dB of cut or boost45. Blend is the control that matters most for bassists pushing gain: it sets how much of your clean direct signal sits alongside the SansAmp circuitry, so low end survives while the Drive control adds grind53.

On the single-channel Bass Driver DI, the unit is engineered with three outputs: an effected XLR, an effected 1/4", and a parallel, uneffected 1/4", intended to drive power amps, recording desks, PA mixers, or enhance an existing rig4. The Bass Driver DI's footswitch activates the Tube Amplifier Emulation circuitry; with it disengaged, the unit works as a standard active transparent direct box3.

Power options

The Programmable Bass Driver DI runs three ways:

  • Phantom power, supplied down the XLR cable from a mixing desk or interface3
  • A 9V alkaline battery, not included3
  • An optional DC power supply, Tech 21 model #DC9; the former #DC2 and #DC4 models also work1

Phantom power operation is the option that matters most for gigging and recording bassists: with a desk supplying phantom power, the unit needs no battery and no wall supply, which is one less thing to fail on stage3.

How it relates to the Bass Driver DI and V2

The SansAmp Bass Driver DI line goes back to 1994, when the original was introduced, and it has been a staple for players and studios almost since that day67. The Programmable version is a variant of that single-channel predecessor, with the same controls and analog circuitry plus the three-channel programmability1.

The original Bass Driver DI has since been discontinued, replaced by the Bass Driver DI V2, which was due for release on 24th August 20168. Version 2 contains the identical all-analog circuitry of its predecessor but adds updates aimed at the modern bassist7. Its toggle switches were replaced by push buttons9, including a push button that boosts the main 1/4" out by +10 dB and buttons that engage ground lifting or phantom power through the XLR jack, features Premier Guitar called handy for direct recording7. It also adds a Mid shift between 500Hz and 1000Hz and a Bass shift between 40 and 80 Hz910.

Reviewers have been consistent about the V2's core sound. Premier Guitar found it "Delivers classic Bass Driver tone. Frequency shift switches and midrange dial help tailor the sound even further."7 Guitar World's 2026 bass preamp guide called it a proper classic, praising its classic tube-style tones and build quality, while noting it is "a little dated compared to competition"11. Gearnews' Jef, an owner of earlier SansAmps, called them "really handy and easy to use DI boxes and amp simulator pedals."8

"The original, bombproof, do-it-all bass preamp, with an iconic and oft-imitated sound, in programmable multi-preset form."
Guitar World2

In January 2026, Tech 21 brought the Programmable Bass Driver into the digital domain with the SansAmp Programmable Bass Driver ELITE, a variant of the analog Programmable unit12. The ELITE adds a chromatic tuner, an effect loop, 1/4-inch and XLR outputs, a rugged all-metal housing, and an included Tech 21 MIDI Driver interface with 3.5mm Type A MIDI cables, running on an included 9V DC auto-switching power supply with interchangeable international plugs121314. Inventor Andrew Barta had, in Bass Musician Magazine's words, "long been on a quest to do the same in the digital domain" as the original SansAmp achieved in analog12.

For a player choosing between them today, the split is straightforward: the analog Programmable Bass Driver DI keeps the original all-analog circuitry with three stored tones1, the V2 keeps the single-channel circuitry with modern switching and EQ shifts79, and the ELITE moves the concept into digital with MIDI and a tuner12.

Videos

Tech 21 Sans Amp Programmable Bass Driver DI: Gear Up
gearuptmntv
Tech 21 SansAmp Programmable Bass Driver DI | Review and Demo
Zachariah Connor
Tech21 Bass Driver DI Programmable Sample Settings
Pat4Strings

Questions

How do I save a tone on the Programmable Bass Driver DI?

Tweak the knobs until you find a tone you like, then double-tap on a footswitch. The tone is saved in that channel, and the unit holds three channels, so you can keep three different setups ready and switch between them from the floor.

Can the Bass Driver DI Programmable run on phantom power?

Yes. Tech 21 lists the unit as operable via phantom power, which means a mixing desk supplying phantom power down the XLR cable can run it without a battery or wall supply. It also runs on a 9V alkaline battery or an optional Tech 21 DC9 power supply.

What is the difference between the Bass Driver DI and the Programmable version?

The Programmable version carries the same all-analog circuitry and the same six controls as the single-channel Bass Driver DI, but adds three footswitch-selectable channels, each storing a saved tone. The original Bass Driver DI gives you one tone at a time; the Programmable gives you three at your toetips.

Does it have a built-in cab simulation?

Yes. The 100% analog SansAmp Tube Amplifier Emulation technology covers the entire signal chain, from pre-amp to power amp to speaker simulation. Tech 21 says the speaker sim is tailored for a smooth, even response, like a multiply-miked cabinet, without the peaks and valleys of many impulse responses.

Is the original Bass Driver DI discontinued?

Yes. The original SansAmp Bass Driver DI, first introduced in 1994, was discontinued when the Version 2 replaced it. Version 2 uses the identical all-analog circuitry but adds push-button switches and new Mid and Bass shift controls.

Can the Programmable Bass Driver DI run on phantom power?

Yes, Tech 21 states the unit is operable via phantom power. Its other power options are a 9V alkaline battery, which is not included, and an optional Tech 21 DC9 DC power supply. Former Tech 21 supply models DC2 and DC4 also work.

Sources (14)
  1. Bass Driver Programmable, Tech 21 NYC, 2025-12-05
  2. IK Multimedia TONEX One Bass Edition review, Guitar World, 2025-11-18
  3. Bass Driver DI, Tech 21 NYC, 2024-03-13
  4. Bass Driver V1, Tech 21 NYC, 2019-06-24
  5. Tech 21’s SansAmp Bass Driver DI Celebrates 30th Anniversary, Premier Guitar, 2024-03-25
  6. Bass Driver DI 30th Anniversary, Tech 21 NYC, 2025-12-02
  7. Bass OD/DI/Preamp Pedal Roundup, Premier Guitar, 2017-05-08
  8. Tech 21 SansAmp Bass Driver DI V2, gearnews.com, 2016-08-18
  9. Tech 21 SansAmp Bass Driver DI Version 2 Review, Bass Musician Magazine, 2016-11-01
  10. Best overdrive pedals for bass 2026: The ultimate in bass saturation at all price points, Guitar World, 2026-06-01
  11. Best bass preamp pedals: consistently great tone, anywhere, Guitar World, 2023-05-23
  12. Gear News: Tech 21 Brings the SansAmp Programmable Bass Driver into the Digital Domain with the ELITE, Bass Musician Magazine, 2026-01-20
  13. SansAmp Programmable Bass Driver ELITE, Tech 21 NYC, 2026-08-14
  14. Tech 21 Brings the SansAmp Programmable Bass Driver into the Digital Domain with the ELITE, Bass Magazine, 2026-01-20

Other bass pedals

All bass pedals